VANCOUVER, BC and HONG KONG / ACCESSWIRE / April 7, 2022 / Reyna Silver Corp. (TSXV:RSLV)(OTCQX:RSNVF)(FRA:4ZC) ("Reyna" or the "Company") is pleased to report results from its 8,000 m Phase 2 drilling program on its 100% owned Guigui Project in the heart of the historic more than 500 million ounce Santa Eulalia Silver District in central Chihuahua-Mexico's largest Carbonate Replacement Deposit (CRD). Reyna's exploration is focused on finding the source of the system and believes that Phase 1 Hole GG21-28, which cut multi-stage Silver-Copper-Zinc-Lead sulphide-mineralized skarn (high-temperature alteration) overprinted on a previously unknown highly-felsic intrusive lies close to that inferred source (See Press Release of Oct., 28, 2021).
Phase 2 follow-up drilling was designed with two goals. The first was to take aggressive step-outs from GG21-28 to determine the extent and zoning of that mineralized skarn. Four of the five Phase 2 holes cut intrusive-hosted mineralized skarn very similar to that in GG21-28 (Table 1), significantly increasing confidence in the expanded mineralization footprint, which now covers an area of at least 0.5 km2. The second important focus was to look within the overlying 1,200m thick historically productive limestone sequence for mineralization potentially sourced from the mineralized skarn. Silver-bearing sulphide veins ranging from a few centimetres to 4.5 metres wide (core length) cutting massive limestone were identified in 4 of 5 holes between about 340 and 720m above the mineralized skarn zone (Table 2). These are all high-angle structures that closely resemble "feeder" or "bleeder" structures that extend to and from major replacement bodies in the historic mines and may provide important mineralization vectors moving forward. Phase 3 will focus on seeking massive sulphide replacement mineralization related to these upper-level structures while continuing to zero in on the source of the district.
Highlights from the Phase 2 Drilling Program:
- Holes drilled 650, 770, and 1089 metres from discovery Hole GG21-28 (as well as from the same pad) all intersected varying thickness and grades of intrusive-hosted mineralized skarn. The mineralized skarn footprint now exceeds 0.5 km2 (Fig.1)
- Hole GG21-31, 650m north of Hole 28, intersected 34.5m of mineralized skarn including 2.62m of 130 g/t Ag with 0.7m of 338 g/t Ag (Table 1).
- Four holes intersected high-angle silver-bearing sulphide veins 342 to 719m above the mineralized skarn, including Hole GG21-30 which reported 2.11m of 233 g/t Ag (Table 2).
Click here to watch Jorge Ramiro Monroy and Dr. Peter Megaw talk about Phase 2 at Guigui.
"With Hole 28, we were excited to discover strongly mineralized skarn and are delighted that our aggressive Phase 2 step-outs expanded the skarn footprint so dramatically. We are equally pleased to have cut multiple high-angle silver-rich veins higher in these holes. These were probably fed by the underlying skarns and are the type of structures the old-timers chased towards the district's famous silver-rich orebodies," said Jorge Ramiro Monroy, CEO of Reyna Silver. "Phase 2 has given us multiple targets and areas of interest to follow up, which validates our commitment to true district-scale exploration. We have already begun the groundwork in preparation for our minimum 8,000m, fully-financed, Phase 3 drilling campaign."
"When we're exploring at district-scale, we follow up a discovery hole like Hole 28 with widely spaced drilling to determine the variations and scope of the mineralization. A 0.5 km2 footprint of repeatedly mineralized skarn with multiple overlying mineralized structures is extremely encouraging and gives us two exciting exploration targets to pursue," said Dr. Peter Megaw, Chief Exploration Advisor for Reyna Silver. "The first thing is to try following the high-level structures into high-grade, limestone-hosted massive sulphide mineralization like that mined historically in the district. Then we can seek high-volume mineralized skarn related to the district's source intrusion - a key piece of the puzzle and a principal component of our ongoing exploration program. We are currently concatenating all the data to strategically target Phase 3 drilling."
Table 1. Mineralized Skarn Highlights in Hole GG21-31.
Hole ID# | From (m) | To (m) | Width (m) | Ag (g/t) | Pb (%) | Zn (%) | Zone |
GG21-31 |
| 1,304.73 | 1,307.35 | 2.62 | 130 | 0.17 | 0.17 | Silver Zone |
including | 1,305.75 | 1,306.45 | 0.70 | 338 | 0.44 | 0.42 |
with | 1,305.75 | 1,305.93 | 0.18 | 1,040 | 1.47 | 0.45 |
| 1,337.65 | 1,340.80 | 3.15 | 54 | 2.17 | 9.94 | Zinc-Lead Zone |
including | 1,337.65 | 1,339.50 | 1.85 | 128 | 3.69 | 16.00 |
Table 2. Silver-bearing Sulphide Veins in upper-level, limestone-hosted structures.
Hole ID# | From (m) | To (m) | Width (m) | Ag (g/t) | Pb (%) | Zn (%) |
GG21-30 |
| 643.80 | 645.80 | 2.00 | 106 | 0.12 | 0.24 |
| 887.69 | 889.80 | 2.11 | 233 | 0.02 | 0.02 |
GG21-31 |
| 547.58 | 548.78 | 1.20 | 105 | 4.88 | 0.62 |
GG21-33 |
| 648.03 | 652.54 | 4.51 | 106 | 0.88 | 0.11 |
Phase 2 Drilling
Phase 2 was an aggressive follow-up of Hole GG21-28, which intersected multi-stage Silver-Copper-Zinc-Lead sulphide-mineralized skarn (high-temperature alteration) overprinted on a previously unknown highly-felsic intrusive (See Press Release of XX/YY 2022). Phase 2 consisted of 5 holes, GG21-29 to GG21-33, totaling 8,562m drilled in a 50 ha (0.5km2) area within Reyna's 4,750 ha (47.5 km2) Guigui concession package (Figure 1). Working outwards from Hole 21-28, targets were designed to determine the extent and zoning of that mineralized skarn by integrating the results of Phase 1 with detailed surface mapping and geochemistry, airborne geophysics, and hyperspectral satellite imagery all plugged into our district exploration model based on 300 years of historic underground mining. After the completion of each hole, results were remodeled, and targets were modified accordingly. Relative to Hole GG21-28: Hole GG21-30 was 777m east, Hole GG21-31 was 615m north, Hole GG21-32 was 1089m east, and Hole GG21-33 was drilled from the same pad (Figure 1). Notable results from Holes GG21-30 to GG21-33 are presented in Table 3
Figure 1. Map of the combined Guigui Property showing its location south of the historic district mines and locations of drill holes described in the release. The most recent Reyna Silver drill holes are black, prior Reyna Silver drill holes are in grey, and the MAG Silver drill holes are in pale grey.
Four of the five Phase 2 holes succeeded in intersecting intrusive-hosted mineralized skarn (Table 1). The best hole was GG21-31, which cut 35.5m reporting 2.35% Zinc, 40 g/t Silver, and 0.44% Lead; including 3.15m assaying 9.9% Zinc, 54 g/t Silver, and 2.1% Lead and a separate 0.7m grading 338 g/T Silver, 0.42% Zn and 0.44% Lead. These individual high-grade zones are very similar to those of GG21-28, which significantly increases confidence in the expanded mineralization footprint, which now covers an area of at least 0.5 km2.
The second important focus of Phase 2 drilling was to look above the mineralized skarn zone within the overlying 1,200m thick historically productive limestone for mineralized structures potentially sourced from the mineralized skarn. Silver-bearing sulfide veins ranging from a few centimetres to 4.5 metres wide (core length) cutting massive limestone were identified in 4 of 5 holes between about 340m and 720m above the mineralized skarn zone. Hole 30 cut two such structures the better of which cut 233 g/t silver over 2.1m (Table 2). These are all high-angle structures that closely resemble "feeder" or "bleeder" structures that extend to and from major replacement bodies in the historic mines and may provide important mineralization vectors moving forward.
The two near end-members of the CRD spectrum emerging from Phases 1 and 2 provide critical tools for focusing ongoing exploration (See Figure 3 for a simplified CRD model). Phase 3 will focus on the upper-level structures potentially indicative of massive replacement mineralization while continuing to hunt for the source of the district.
Intrusive-Hosted Mineralized Skarn
Compositionally, texturally, and geologically the intrusive-hosted mineralized skarn found in Phase 2 drilling appears to be an extension of the mineralization discovered in Hole GG21-28- expanding the known footprint of mineralized skarn to at least 0.5 km2. A key characteristic of large CRD systems is the presence of multiple, progressively differentiated intrusive stages fed from a source intrusion. Discovery hole GG21-28, plus four of the Phase 2 holes, cut a previously unknown quartz-eye rhyolite, a highly evolved style of intrusive, probably closely linked to the source intrusion and affected by strong, multi-stage mineralization and skarn alteration caused by hydrothermal fluids emanating from it. Compositionally, the mineralized skarn continues to look very similar to the mineralized skarn and sulfide replacement mineralization exploited in the San Antonio mine 2 km east of the Hole GG21-28 area. These similarities include multi-stage epidote-dominated skarn alteration and elevated tungsten and indium values (Hole GG21-31 anomalies: Tungsten 330-550 ppm; Indium 17-68 ppm). Features like these seen in the expanded mineralized skarn footprint should help in vectoring to the source, where mineralization is expected to be larger scale and more pervasive.
Limestone-Hosted, Silver-Rich Sulphide Veins
Importantly, silver-rich distal-style sulphide veins, ranging in width from 1 cm to over 4.5 metres were discovered well above the mineralized skarn in four of the holes drilled in Phase 2. The largest of these silver-bearing sulphide veins were cut in Holes GG21-30, GG21-31, GG21-32, and GG21-33 and lie 342m, 478m, 719m, and 435m respectively above the intrusive skarn (Table2). Numerous narrower examples were also found in these holes and Hole GG21-29. These high-angle veins show multiple stages of manganoan "fugitive calcite" veining bracketing silver-bearing sulphide mineralization stages. The silver values and trace metal geochemistry indicate that they are similar to the "fluid escape structures" typically found distal to massive sulphide CRD mineralization. These types of structures are classified as "feeder" or "bleeder" structures, depending on whether they "fed" massive sulphide mineralization or "bled" mineralizing fluids outwards from them. Similar structures were historically used by the district's miners to lead to the chimney-manto mineralization exploited in the district's mines.
Figure 2. Cross-section showing Phase 1 and 2 drill results. The red colour represents the higher-level silver-bearing sulphide veins found in Phase 2. Intrusive-hosted mineralized skarn is shown in hot pink for Phase 2 and pale pink for Phase 1.
Table 3. Notable Mineralized Skarn results from Holes GG21-30 to GG21-33.
Hole ID# | From (m) | To (m) | Width (m) | Ag (g/t) | Pb (%) | Zn (%) |
GG21-30 | | | | | | |
| 1,260.25 | 1,260.55 | 0.30 | 22 | 2.88 | 1.67 |
GG21-31 | | | | | | |
| 1,304.73 | 1,307.35 | 2.62 | 130 | 0.17 | 0.17 |
including | 1,305.75 | 1,306.45 | 0.70 | 338 | 0.44 | 0.42 |
including | 1,305.75 | 1,305.93 | 0.18 | 1,040 | 1.47 | 0.45 |
| 1,337.65 | 1,340.80 | 3.15 | 54 | 2.17 | 9.94 |
including | 1,337.65 | 1,339.50 | 1.85 | 128 | 3.69 | 16.00 |
GG21-32 | | | | | | |
| 1,133.07 | 1,134.43 | 1.36 | 22 | 1.80 | 1.17 |
| 1,238.95 | 1,239.57 | 0.62 | 142 | 10.39 | 1.06 |
GG21-33 | | | | | | |
| 1,094.54 | 1,095.30 | 0.76 | 18 | 2.68 | 4.87 |
Figure 3. Simplified CRD system model. The source intrusion and related proximal mineralization shown within the highlighted area have yet to be found in the Santa Eulalia District and are the principal focus of Reyna Silver's exploration program. However, the potential for additional manto and chimney-style massive sulphide mineralization in the limestone outboard of the source zone remains high and is an equally important exploration focus.
QA/QC STATEMENT
Reyna Silver follows industry standard procedures for diamond core drilling and sample analysis. Drilling is carried out using NQ and HQ size tooling. Drill core is cut in half using a diamond rock saw with one-half of the core taken as an analytical sample and the other half kept for reference. Sample intervals are generally 0.2 to 1.5 m; producing samples weighing between 0.2 and 8 kg. Half-core samples are security sealed and delivered directly by Reyna Silver's contract geological team to the internationally certified ALS Minerals laboratory facilities in Chihuahua City where the samples are prepared and shipped to Vancouver, Canada for analysis. Assaying is done by ALS in Canada under an ISO 1702 Quality management system. Samples are fire assayed for Au and analyzed for Ag and multi-elements using method code ME-MS41 following an aqua regia digestion. Overlimits are analyzed using the most appropriate method. Multi-element geochemical standards and blanks or duplicates are inserted systematically into the drill core sampling series to monitor lab performance.
QUALIFIED PERSON
Dr. Peter Megaw, Ph.D., C.P.G., the Company's Chief Exploration Advisor and Qualified Person, reviewed the technical aspects of exploration projects described herein and is responsible for the design and conduct of the exploration programs and the verification and quality assurance of analytical results. Dr. Megaw is not independent as he and/or companies with which he is affiliated hold Net Smelter Royalties on the Guigui and Batopilas Projects that predate Reyna Silver acquiring them.
ABOUT REYNA SILVER
Reyna Silver Corp. (TSXV: RSLV) is a growth-oriented junior exploration and development company focused on exploring for high-grade, district-scale silver deposits in Mexico and USA. Reyna's principal properties are the Guigui and Batopilas Properties in Chihuahua, Mexico. Guigui covers the interpreted source area for the Santa Eulalia Carbonate Replacement District (CRD) and Batopilas covers most of Mexico's historically highest-grade silver system. The Company also has an option to acquire 80% of the Medicine Springs property in Nevada, USA as well as the early stage La Durazno and Matilde and La Reyna mineral properties in Mexico.
For Further Information, Please Contact:
Jorge Ramiro Monroy
Chief Executive Officer
Info@reynasilver.com
reynasilver.com
SOURCE: Reyna Silver Corp.
View source version on accesswire.com:
卑詩省バンクーバーと香港/ACCESSWIRE/2022年4月7日/レナ銀業会社(トロント証券取引所株コード:RSLV)(場外取引コード:RSNVF)(フランクフルト空港株式コード:4 ZC) ("レイナ“または”会社)メキシコ中部チワワの歴史ある5億オンスを超えるSanta Eulalia銀区の心臓地帯に位置し、メキシコ最大の炭酸塩置換鉱床(CRD)であることが嬉しい。メキシコ最大の炭酸塩置換鉱床(CRD)である。レイナの探査の重点はシステムの源を探すことであり、一期掘削G 21-28は多段階銀銅亜鉛鉛硫化物鉱化夕カル岩(高温食変)を切断し、以前の知られていない高長英質侵入帯付近に重ね合わせたと考えられる(2021年10月28日のプレスリリース参照)。
第二段階後続掘削の設計には二つの目標がある。まず、この鉱化夕カル岩の範囲と区画を決定するために、G 21-28から積極的な脱退措置をとることである。5つの2期掘削孔のうち4つはG 21-28(表1)と非常に類似した侵入型賦存鉱化夕カル岩を切断し、鉱化足跡の拡大に対する人々の自信を大幅に強化し、現在少なくとも0.5キロの区域をカバーしている2それは.第二の重要なポイントは,上覆1,200メートル厚さの歴史上産された石灰岩配列内で鉱化の可能性のある珪カル岩を探すことである。鉱化珪カル岩帯上方約340 mから720 mの間の5穴のうち4穴に銀含有硫化物鉱脈が発見され,その幅は数cmから4.5 m(岩心長)で塊状石灰岩が切断されている(表2)。これらは高角度構造であり,歴史鉱山における主要交替体から主要交替体から延在する“供給器”や“漏れ器”構造に非常に類似しており,前方移動の重要な鉱化担体を提供することが可能である。第3段階では,これらの上層構造に関連する塊状硫化物代替鉱化を探すことに重点を置きながら,この地域の源に焦点を当て続けた。
第2段階掘削計画のハイライト:
- 発見穴G 21-28(および同じマットから)から650、770、1089メートルの穴を開けました異なる厚さと品位の侵入型鉱化夕カル岩が交わる。鉱化した珪カル岩の足跡は現在0.5キロを超えています2(図1)
- GG 21-31孔は28号孔の北650メートルに位置し、34.5メートルの鉱化夕カル岩と交差し、その中の2.62メートルは130 g/トン銀を含み、0.7メートルは338 g/トン銀を含む(表1)。
- 4つの穴は鉱化珪カード岩の上方342から719メートルの高さの銀含有硫化物鉱脈と交差し、その中でGG 21-30洞は高さ2.11メートルの233 g/トン銀を報告した(表2)。
ホルヘ·ラミロ·モンロイとピーター·メイゴ博士が貴桂の第2段階について話しているのをクリックしてみましょう
Reyna Silverのホルヘ·ラミロ·モンロイ最高経営責任者は“28番ホールでは、強い鉱化した夕カル岩が発見されて嬉しいです。積極的な二期工事が夕カル岩の足跡を大きく拡大してくれて嬉しいです。私たちも同じように、これらの穴の中に複数の角度の富銀鉱脈を掘ったことが嬉しいです。これらの鉱脈は下の夕カル岩から提供されている可能性が高く、古い世代がこの地域の有名な富銀鉱体を追いかけている構造タイプでもあります”と話している。“二期工事は私たちに複数の目標と興味のある地域をフォローさせてくれました。これは私たちが真の区レベルの探査に取り組んでいることを証明しています。私たちは最低8000メートルの長さで、資金が十分な三期掘削活動の準備を始めています”
私たちは地域規模で探査を行う時、28号孔のような発見孔の後に広範囲の掘削を行い、鉱化の変化と範囲を決定します。0.5キロ2Reyna Silver首席探査顧問のPeter Megaw博士は,鉱化を繰り返す珪カル岩帯に複数の鉱化構造が覆われていることに非常に鼓舞され,我々に2つのエキサイティングな探査目標を与え,まず高層構造に沿って高品位な石灰岩に沿って存在する塊状硫化物の鉱化を試み,この地域の歴史上採掘されたように試みた。そして、この地域の源岩侵入に関連する大量の鉱化夕カル岩を探すことができる--これは謎の重要な部分であり、私たちが行っている探査計画の主要な構成要素でもある。我々は現在、第3段階の掘削を戦略的に狙うために、すべてのデータを直列に連結している“と述べた
表1.GG 21−31井戸中の珪カル岩鉱化輝点。
孔ID番号 | 送信者(M) | (M)まで | 幅(メートル) | 銀(g/トン) | PB(%) | 亜鉛(%) | 分帯 |
GG 21-31 |
| 1,304.73 | 1,307.35 | 2.62 | 130 | 0.17 | 0.17 | 銀色地帯 |
含まれています | 1,305.75 | 1,306.45 | 0.70 | 338 | 0.44 | 0.42 |
使用 | 1,305.75 | 1,305.93 | 0.18 | 1,040 | 1.47 | 0.45 |
| 1,337.65 | 1,340.80 | 3.15 | 54 | 2.17 | 9.94 | 亜鉛鉛帯 |
含まれています | 1,337.65 | 1,339.50 | 1.85 | 128 | 3.69 | 16.00 |
表2.石灰岩の上層構造に付与された銀含有硫化物鉱脈。
孔ID番号 | 送信者(M) | (M)まで | 幅(メートル) | 銀(g/トン) | PB(%) | 亜鉛(%) |
GG 21-30 |
| 643.80 | 645.80 | 2.00 | 106 | 0.12 | 0.24 |
| 887.69 | 889.80 | 2.11 | 233 | 0.02 | 0.02 |
GG 21-31 |
| 547.58 | 548.78 | 1.20 | 105 | 4.88 | 0.62 |
GG 21-33 |
| 648.03 | 652.54 | 4.51 | 106 | 0.88 | 0.11 |
第2段階掘削
第2段階は,以前未知の高長英質侵入岩に重ねられた多段階銀銅亜鉛鉛硫化物鉱化夕カル岩(高温食変)と交わるGG 21−28孔の積極的な後続行動である(XX/YY 2022新聞稿参照)。第2段階は5つの孔を含み、G 21-29~GG 21-33は、50ヘクタール(0.5キロ)の範囲で全長8,562メートルに潜り込んでいる2)レイナ4750 ha(47.5 km)の範囲2)貴国特許権パッケージ(図1)。21-28号洞から外へ作業し、第1段階の結果を詳細な地表マッピングと地球化学、航空地球物理と高スペクトル衛星画像と組み合わせることで、この鉱化夕カル岩の範囲と区画を決定するために目標を設計し、これらは300年の歴史に基づく地下採鉱の地域探査モデルに溶け込んでいる。各ホールが完了した後、結果を再構築し、それに応じて目標を修正するGG 21−28孔に対して:G 21−30孔は東に777 m,G 21−31孔は北615 m,G 21−32孔は東に1089 m,GG 21−33孔は同じマットから採取した(図1).表3にG 21−30からGG 21−33孔の有意な結果を示す
図1.統合後の貴国財産地図は,プレスリリースに記述されている歴史地域鉱山以南の位置と穴あけ位置を示している。最近のレナ銀の穴は黒で、前のレナ銀の穴は灰色で、MAG銀の穴は薄い灰色です。
5つの二期孔のうち4つは侵入岩型鉱化夕カル岩との交差に成功した(表1)。最適な穿孔はGG 21-31、亜鉛含有2.35%、銀40 g/t、鉛含有0.44%、亜鉛含有35.5 m、亜鉛含有9.9%、銀54 g/t、鉛含有2.1%、銀0.7 m、銀338 g/t、亜鉛含有0.42%、鉛0.44%であった。これらの単独の高品位帯はG 21-28とよく似ており、これは鉱化足跡の拡大に対する自信を大いに強め、現在この区域は少なくとも0.5キロをカバーしている2.
第二段階掘削の第二の重要なポイントは,上覆1,200メートルの厚さの歴史上に石灰岩内の鉱化夕カル岩帯の上方に鉱化夕カル岩からの可能性のある鉱化構造を探すことである。鉱化珪カル岩帯上方約340 mから720 mの間の5穴のうち,4穴に銀含有硫化物鉱脈が認められ,その幅は数cmから4.5 m(岩心長)であり,大量の石灰岩が切断されていた。30孔は、233 g/トンの銀を2.1メートル以上に切断することがより好ましい2つの構造を切断した(表2)。これらは高角度構造であり,歴史鉱山における主要交替体から主要交替体から延在する“供給器”や“漏れ器”構造に非常に類似しており,前方移動の重要な鉱化担体を提供することが可能である。
ステップ1およびステップ2に現れるCRDスペクトルの2つの近位メンバは、集中進行中の探索にキーツールを提供する(簡略化されたCRDモデルは図3を参照)。第3段階では,大規模代替鉱化を指示可能な上層構造に重点を置きながら,その地域の源を探し続ける。
侵入賦存鉱化夕カル岩
成分,構造,地質では,第2段階掘削で発見された侵入岩型鉱化夕カル岩は,GG 21−28孔で発見された鉱化の延長であるようである−既知の鉱化夕カル岩足跡を少なくとも0.5キロに拡大した2それは.大型CRDシステムの1つの重要な特徴は,ソースからの侵入の複数の漸進的な異なる侵入段階が存在することである.発見孔GG 21-28は、4つの二期孔に加えて、以前知られていなかった石英眼流紋岩を切断し、これは高度に進化した侵入岩タイプであり、源岩侵入と密接に関連している可能性があり、そしてその放出された熱液による強い多段階鉱化と珪カル岩エッチング変の影響を受ける可能性がある。成分では,鉱化した珪カル岩は依然としてG 21−28孔の東2キロのサンアントニオ鉱で採掘された鉱化夕カル岩と硫化物Ge鉱化とよく似ているように見える。これらの類似点は,多期緑簾石主導の珪カル岩エッチングとタングステンとインジウムの上昇(G 21−31孔異常:タングステン330−550 ppm;インジウム17−68 ppm)である。拡大した鉱化夕カル岩の足跡に見られるこれらの特徴は鉱源の位置づけに役立つはずであり,そこの鉱化はより大規模で一般的であることが予想される。
石灰岩に蓄積された富銀硫化物鉱脈
重要なのは、2期掘削の4つの孔のうち、鉱化夕カル岩上方に幅1 cmから4.5 m以上の遠端富銀硫化物鉱脈が発見されたことである。その中で最大の銀含有硫化物鉱脈はそれぞれGG 21−30、GG 21−31、G 21−32及びG G 21−33孔に切断され、それぞれ夕カード岩の上方342 m、478 m、719 m及び435 mに侵入したところに位置する(表2)。これらの穴やG 21−29ホールでも狭い例が多く認められた。これらの高角度鉱脈は多期マンガン系“逃げ逸方解石”脈状被覆銀硫化物鉱化段階を示した。銀値と微量金属地球化学により、それらは塊状硫化物CRD鉱化遠端の典型的な“流体脱出構造”と類似していることを表明した。これらが塊状硫化物を外に“輸送”するか,外に“輸送”するかによって成鉱流体が形成され,これらのタイプの構造は“補給型”や“漏れ型”構造に分類される。歴史上、この地域の鉱夫は似たような構造を使って、この地域の鉱山採掘の煙突-マントー鉱化を招いたことがある。
[図2]第1段階および第2段階掘削結果の断面を示す図である。赤は第2段階で発見された高いレベルの銀含有硫化物鉱脈を表します。侵入鉱化夕カル岩は第2段階ではピンク、第1段階では淡いピンクを示します。
表3.GG 21−30からGG 21−33孔にかけて顕著な珪カル岩鉱化結果。
孔ID番号 | 送信者(M) | (M)まで | 幅(メートル) | 銀(g/トン) | PB(%) | 亜鉛(%) |
GG 21-30 | | | | | | |
| 1,260.25 | 1,260.55 | 0.30 | 22 | 2.88 | 1.67 |
GG 21-31 | | | | | | |
| 1,304.73 | 1,307.35 | 2.62 | 130 | 0.17 | 0.17 |
含まれています | 1,305.75 | 1,306.45 | 0.70 | 338 | 0.44 | 0.42 |
含まれています | 1,305.75 | 1,305.93 | 0.18 | 1,040 | 1.47 | 0.45 |
| 1,337.65 | 1,340.80 | 3.15 | 54 | 2.17 | 9.94 |
含まれています | 1,337.65 | 1,339.50 | 1.85 | 128 | 3.69 | 16.00 |
GG 21-32 | | | | | | |
| 1,133.07 | 1,134.43 | 1.36 | 22 | 1.80 | 1.17 |
| 1,238.95 | 1,239.57 | 0.62 | 142 | 10.39 | 1.06 |
GG 21-33 | | | | | | |
| 1,094.54 | 1,095.30 | 0.76 | 18 | 2.68 | 4.87 |
図3.簡略化されたCRDシステムモデル強調表示された区域内に示された源岩と関連する近位鉱化はSanta Eulalia区では発見されておらず,これがReyna Silver探査計画の主な重点である。しかし、鉱源区の外側の石灰岩の中で、追加のマントー式と煙突式塊状硫化物の鉱化の潜在力は依然として高く、同様に重要な探査重点である。
QA/QC声明
Reyna Silverはダイヤモンドコア掘削とサンプル分析の業界標準プログラムに従っている。掘削はNQとHQサイズツールを用いて行った。ダイヤモンドのこぎりでドリルコアを2つに切断し、その半分を分析サンプルとし、残りの半分は参考のために保持した。サンプリング間隔は一般に0.2~1.5 mであり、生成された試料重量は0.2~8 kgである。半岩心試料は安全密封され,Reyna Silverの契約地質チームによってチワワ市に位置する国際認証ALS Minerals実験室施設に直接搬送され,そこで試料が用意されカナダバンクーバーに運ばれて分析された。アッセイはカナダのALSがISO 1702品質管理システムに基づいて行った。王水分解後,方法コードME−MS 41を用いて試料に対して金の火分析と銀と多元素の分析を行った。最適な方法を用いてオーバーランを分析する.多元素地球化学標準と空白或いはコピーは実験室性能を監視するために掘削コアサンプリングシリーズにシステム的に挿入される。
資格のある人
会社の首席探査顧問兼合格者のPeter Megaw博士は本文で述べた探査プロジェクトの技術方面を審査し、探査方案の設計と実施及び分析結果の検証と品質保証を担当した。Megaw博士は、Reyna Silverを買収する前にGuiguiおよびBatopilasプロジェクトの製錬所の純特許使用料を持っていたので、独立していなかった。
レイナ·シルバーについて
Reyna Silver Corp.(トロント証券取引所株式コード:RSLV)は成長志向の一次探査と開発会社で、メキシコとアメリカで高品位、地域規模の銀鉱の探査に専念している。レナの主な物件はメキシコチワワのGuiguiとBatopilas Propertiesです。Guiguiはサンユラリア炭酸塩置換区(CRD)の解釈源領域をカバーし,Batopilasはメキシコ史上最高品位の銀システムの大部分をカバーしている。同社はまた、米ネバダ州メディシンスプリングスの80%の鉱物と、メキシコ初期のLa Durazno、Matilde、La Reyna鉱物を買収する権利がある。
もっと情報を知りたいなら、連絡してください
ホルヘ·ラミロ·モンロイ
最高経営責任者
メール:Info@reynasilver.com
Reynasilver.com
資料源:レナ銀業会社
Accesswire.comでソースコードバージョンを表示する: