300930 Hang zhou Yitong New Materials
- 17.40
- -0.92-5.02%
Hang zhou Yitong New Materials News
Yitong New Materials (300930.SZ) 2023 equity distribution: 1 yuan for every 10 shares
Yitong New Materials (300930.SZ) issued an announcement. The company's 2023 equity distribution plan is: With the company's current...
Hangzhou Yitong New Material Co., LTD's (SZSE:300930) Most Bullish Insider Is Top Key Executive Zhirong Wang, and Their Holdings Value Went up by 21% Last Week
Key Insights Hangzhou Yitong New Material's significant insider ownership suggests inherent interests in company's expansion Zhirong Wang owns 57% of the company Ownership research, combined with
Yitong New Materials (300930.SZ): Net profit of 10.997 million yuan in the first quarter decreased 29.19% year-on-year
Gelonghui, April 22 | Yitong New Materials (300930.SZ) released its report for the first quarter of 2024. Operating revenue for the reporting period was 105 million yuan, up 9.25% year on year; net profit attributable to shareholders of listed companies was 10.997 million yuan, down 29.19% year on year; net profit attributable to shareholders of listed companies after deducting non-recurring profit and loss was 9.811 million yuan, down 25.82% year on year; basic earnings per share were 0.10 yuan.
Cizheng Investment, a shareholder of Yitong New Materials (300930.SZ), reduced its holdings by 37,500 shares at the end of the reduction period
Yitong New Materials (300930.SZ) announced that the period of the company's shareholder Cizheng Investment's holdings reduction plan has expired, and its cumulative holdings have been reduced...
Hangzhou Yitong New Material Co., LTD's (SZSE:300930) 30% Price Boost Is Out Of Tune With Earnings
Those holding Hangzhou Yitong New Material Co., LTD (SZSE:300930) shares would be relieved that the share price has rebounded 30% in the last thirty days, but it needs to keep going to repair the rece
SDIC Securities: Demand for chip inductors is expected to increase under the wave of AI applications
With the rapid development of the AI industry, computing power infrastructure such as data centers, AI chips, and servers have increased requirements for electronic components such as chip inductors.
Risks Still Elevated At These Prices As Hangzhou Yitong New Material Co., LTD (SZSE:300930) Shares Dive 27%
The Hangzhou Yitong New Material Co., LTD (SZSE:300930) share price has fared very poorly over the last month, falling by a substantial 27%. The drop over the last 30 days has capped off a tough ye
Yitong New Materials (300930.SZ) will list and circulate 70.5 million restricted shares on January 22
Yitong New Materials (300930.SZ) issued an announcement. The restricted shares listed in circulation are before the company's initial public offering...
Yitong New Materials (300930.SZ): The iron-silicon series produced can be used in the production of magnetic powder cores, so it can be used in products such as photovoltaic inverters
Gelonghui, January 8 | Yitong New Materials (300930.SZ) said on the investor interactive platform that alloy soft magnetic powder can be used as a raw material for the production of magnetic powder cores and chip inductors, and that the iron-silicon series produced by the company can be used in the production of magnetic powder cores, so it can be used in products such as photovoltaic inverters.
Yitong New Materials (300930.SZ): It is proposed to postpone the “Hangzhou Yitong New Materials Research Institute Construction Project” until June 30, 2024
Gelonghui, December 29, 丨 Yitong New Materials (300930.SZ) announced that on December 28, 2023, the company held the 14th meeting of the 2nd board of directors and the 14th meeting of the 2nd board of supervisors to review and pass the “Proposal on the Extension of Some Fund-raising Projects”. It was agreed that the company's fund-raising project “Hangzhou Yitong New Materials Research Institute Construction Project” will be adjusted to June 30, 2024 on the premise that the implementation subject, implementation method, investment use and investment scale of the fund-raising project will not change.
Yitong New Materials (300930.SZ): In the traditional field of powder metallurgy, iron powder can be used to produce bearings, connecting rods and other products
Gelonghui November 17丨Yitong New Materials (300930.SZ) said on the investor interactive platform that in the traditional field of powder metallurgy, iron powder can be used to produce products such as bearings and connecting rods. Currently, the company does not know whether downstream customers use iron powder to produce speed reducers and robot parts.
Yitong New Materials (300930.SZ): There has always been relevant research and development in the field of 3D printed metal powders, and there is currently no mass production
Gelonghui, November 17|Some investors asked Yitong New Materials (300930.SZ) on the investor interactive platform, “Does the company pay attention to the direction of additive materials and 3D printing materials in the R&D investment of new materials? Does the company have technical reserves for 3D printing of titanium alloy materials?” The company replied that the company has always had relevant research and development in the field of 3D printing metal powders, has a certain production capacity, and has not yet mass-produced.
Yitong New Materials (300930.SZ): The new energy equipment key component project is still under construction and is scheduled to be completed in May '24
Gelonghui November 17: Some investors asked Yitong New Materials (300930.SZ) on the investor interactive platform, “Have your products been applied to Qinjie M7? Has your company's new energy key equipment been put into production? Also, what is the current progress of 3D printing materials, and is there any mass production?” The company replied that the iron powder produced by the company can be used as a raw material for the production of lithium iron phosphate batteries. From raw materials to final new energy vehicles, new energy vehicles have to go through several steps from iron powder to cathode materials to lithium iron phosphate batteries to new energy vehicles. Currently, the company does not know the specific information of downstream terminal customers. New energy equipment invested by the company
Yitong New Materials (300930.SZ): Currently, 30x stainless steel is not produced
Gelonghui November 17: Some investors asked Yitong New Materials (300930.SZ) on the investor interactive platform, “Can your products produce 30x stainless steel?” The company replied that it currently does not produce 30x stainless steel.
Yitong New Materials (300930.SZ): The iron-silicon-chromium produced can be used by downstream companies to produce chip inductors
Gelonghui November 17: Some investors asked Yitong New Materials (300930.SZ) on the investor interactive platform, “Can your products be used in chip inductors in the GPU and CPU fields?” The company replied that alloy soft magnetic powder can be used as a raw material for the production of magnetic powder cores and chip inductors. Chip inductors have excellent characteristics such as small size and high efficiency, and are widely used in fields such as mobile phones, laptops, servers, communication power supplies, and GPUs. The ferrosilicon chromium produced by the company can be used by downstream companies to produce chip inductors. Currently, the company does not know the specific application of chip inductors for downstream customers
Yitong New Materials (300930.SZ): Currently there are no business dealings with Xiaomi
Gelonghui November 17: Some investors asked Yitong New Materials (300930.SZ) on the investor interactive platform, “What are your plans in the field of new energy vehicles, and is there any spare parts supply for Xiaomi cars?” The company replied that currently the company is mainly engaged in the production of metal powders. In addition to being used in lithium iron phosphate batteries, iron powder can also be used to produce powder metallurgy products. Currently, the company has no business dealings with Xiaomi Motors.
[Instant Analysis of BT Financial Report] Yitong New Materials 2023 Third Quarter Report: Operating Revenue Increased Slightly, Net Profit Decreased, and Net Cash Flow Decreased Sharply
Announcement time of this financial report: 2023-10-24 17:11:15 Yitong New Materials Co., Ltd. (stock code: 300930) focuses on the metal powder industry. It mainly produces iron-based powders. Its products are widely used in powder metallurgy products, diamond tools, new energy batteries, magnetic materials, thermal spraying, metallurgical accessories and welding materials. Downstream customers include well-known companies such as Mercedes-Benz, BMW, BYD, Bosch, Denso, Aisin, Gree, and Midea. In terms of assets and liabilities, Yitong New Materials's total assets at the end of the third quarter of 2023 were 935 million yuan, compared to 8 at the end of the previous year.
Yitong New Materials (300930.SZ) released results for the first three quarters, with net profit of 43.3083 million yuan, a year-on-year decrease of 38.56%
Yitong New Materials (300930.SZ) released the report for the third quarter of 2023. The company achieved operating income in the first three quarters...
Yitong New Materials (300930.SZ): Currently, the company has no business dealings with Huawei
Glonghui, October 8: Yitong New Materials (300930.SZ) stated on the investor interaction platform that the company currently has no business dealings with Huawei.
Yitong New Materials (300930.SZ): It has always had relevant research and development in the field of 3D printing metal powders. It has a certain production capacity, and has not yet been mass-produced
Glonghui September 15 | Yitong New Materials (300930.SZ) said on the investor interactive platform that the company has always had relevant research and development in the field of 3D printed metal powders, has a certain production capacity, and has not yet been mass-produced. The company will promote related work according to the market development trend of each product.
Analysis
Price Target
No Data
