TORONTO, ON / ACCESSWIRE / May 2, 2022 / Gratomic Inc. ("Gratomic", "GRAT," or the "Company") (TSX-V:GRAT)(OTCQX:CBULF)(FSE:CB82) announces that 1,734.30 m of the 5,000-meter drilling campaign on its Capim Grosso graphite project has been completed. 15 diamond drillholes were completed to date, with two additional holes in progress. The project is located in the Bahia State of Brazil, with the Company holding a 100% controlling interest in the property.
The drilling has been expedited by the introduction of a second drilling rig, which has been onsite since February of 2022 as per this press release dated February 23, 2022.
Table 1: Drillholes completed to date on the Capim Grosso Project in Brazil (WGS84 UTM 24S)
NAME | X | Y | Z | AZIMUTH | DIP | EOH |
CGD001 | 391942 | 8749876 | 381 | 45 | -58 | 100.10 |
CGD002 | 391867 | 8749905 | 382 | 50 | -60 | 141.20 |
CGD003 | 391926 | 8749863 | 381 | 50 | -60 | 120.55 |
CGD004 | 391842 | 8749975 | 381 | 50 | -60 | 93.15 |
CGD005 | 391775 | 8750076 | 378 | 50 | -60 | 111.00 |
CGD006 | 391722 | 8750171 | 378 | 50 | -60 | 120.65 |
CGD007 | 391626 | 8750343 | 375 | 50 | -60 | 120.20 |
CGD008 | 391755 | 8750196 | 376 | 50 | -60 | 100.05 |
CGD009 | 391603 | 8750328 | 376 | 50 | -60 | 120.00 |
CGD010 | 391597 | 8750372 | 375 | 50 | -60 | 141.00 |
CGD011 | 391574 | 8750352 | 376 | 50 | -60 | 140.05 |
CGD012 | 391533 | 8750454 | 373 | 50 | -60 | 134.65 |
CGD013 | 391431 | 8750595 | 373 | 50 | -60 | 140.70 |
CGD014 | 391392 | 8750562 | 376 | 50 | -60 | 151.00 |
CGD015 | 391336 | 8750756 | 371 | 50 | -60 | 206.90 |
The first batch of its drillhole assays from the Capim Grosso Project has been received from SGS Geosol in Brazil which included the following:
75 assays, which includes three internal Certified Reference Materials
Table 2: Table 2 highlights intervals from the first 8 drill holes on the Capim Grosso Project in Brazil (1 % TGC cut-off grade and 3 % minimum TGC grade used). More detailed information of the assay results from the 8 holes is set out in Table 4 below. Internal QA/QC was performed by Gratomic inserting a Certified Reference Material (CRM) every 20 samples, (OREAS 725) which assayed within 97 % of the expected graphitic carbon value of the CRM. The QP therefore accepts the values of the laboratory assays. The intervals are regarded as true width (or as close as possible to) due to the dip of drillholes being perpendicular on measured dip of geology.
DH_Hole | DH_From (m) | DH_To (m) | Length (m) | Total Graphitic Carbon (TGC) (%) |
CGD001 | 20.74 | 31.90 | 11.16 | 13.13 |
37.37 | 38.55 | 1.18 | 10.11 |
39.60 | 40.47 | 0.87 | 3.33 |
40.84 | 41.32 | 0.48 | 3.08 |
CGD002 | 114.35 | 114.45 | 0.10 | 5.92 |
130.25 | 130.69 | 0.44 | 8.42 |
CGD003 | 71.93 | 73.53 | 1.60 | 6.72 |
74.80 | 75.40 | 0.60 | 8.24 |
79.85 | 81.83 | 1.98 | 3.21 |
CGD004 | 26.26 | 27.45 | 1.19 | 3.11 |
63.95 | 65.01 | 1.06 | 3.76 |
CGD005 | 38.07 | 38.64 | 0.57 | 13.54 |
40.00 | 41.58 | 1.58 | 11.13 |
47.23 | 48.65 | 1.42 | 8.56 |
79.24 | 79.56 | 0.32 | 9.13 |
CGD006 | 67.60 | 69.35 | 1.75 | 3.47 |
72.55 | 73.38 | 0.83 | 3.91 |
77.23 | 81.11 | 3.88 | 7.41 |
CGD007 | 16.40 | 17.76 | 1.36 | 3.84 |
23.25 | 24.70 | 1.45 | 10.89 |
50.25 | 56.25 | 6.00 | 3.95 |
56.80 | 58.68 | 1.88 | 5.41 |
64.98 | 65.91 | 0.93 | 6.13 |
91.40 | 92.70 | 1.30 | 3.54 |
CGD008 | 6.20 | 16.05 | 9.85 | 5.00 |
16.55 | 18.55 | 2.00 | 3.50 |
SGS Geosol's graphitic carbon assay methods and equipment include the LECO carbon-sulphur analyzer and high temperature combustion infrared detection. During this procedure, the carbon in the sample is converted to carbon dioxide CO2, which is then measured by infrared (IR) detectors.
Once the drilling is complete and all drillholes are assayed, the Company intends to process the obtained data in order to generate a Maiden Mineral Resource Estimate in accordance with the requirements of National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101") for the Capim Grosso asset, which will be combined with pilot metallurgical testing data and other relevant information in order to generate a Feasibility Study (FS) and fast track the project development.
The tables below present all Total Graphitic Carbon (TGC) (%) assay results obtained so far from the Capim Grosso Property
Table 3: Graphitic carbon assays from the 42 trenches completed on the Capim Grosso Project in Brazil (14 trenches did not intersect graphite). Trenches were sampled according to visual grade estimation in two meter increments in horizontal continuous sections on the pit walls. Where visual grade was regarded as continuous, sampling was completed up to a maximum of 6 m increments. No internal QA/QC was performed by Gratomic, but SGS inserted their own CRMs, which assayed within 90 % of the expected graphitic carbon value of the CRM. The QP therefore accepts the values of the laboratory assays. While the trenches were excavated as close to perpendicular on strike of local litholgies, the dip of each trench cannot be perpendicular on a lithological dip.
TRENCH # | FROM (m) | TO (m) | INTERVAL (m) | SAMPLE # | TGC (%) |
CGT001 | 20 | 22 | 2 | X6201 | 21.65 |
26 | 28 | 2 | X6202 | 19.14 |
CGT002 | 8 | 10 | 2 | X6203 | 27.3 |
16 | 18 | 2 | X6204 | 20.37 |
23 | 24 | 1 | X6206 | 41.79 |
27 | 28 | 1 | X6207 | 7.94 |
CGT004 | 14 | 15 | 1 | X6209 | 16.2 |
30 | 31 | 1 | X6210 | 3.89 |
CGT005 | 35 | 36 | 1 | X6213 | 11.39 |
CGT006 | 15 | 16 | 1 | X6215 | 0.57 |
16 | 18 | 2 | X6216 | 4.58 |
18 | 20 | 2 | X6217 | 8.34 |
20 | 22 | 2 | X6218 | 14.04 |
32 | 34 | 2 | X6222 | 11.74 |
34 | 36 | 2 | X6223 | 9.32 |
36 | 38 | 2 | X6224 | <0,05 |
16 | 22 | 6 | X6225 | 8.45 |
32 | 36 | 4 | X6226 | 6.4 |
CGT007 | 0 | 2 | 2 | X6227 | 6.66 |
2 | 4 | 2 | X6228 | 13.33 |
4 | 6 | 2 | X6229 | 25.04 |
14 | 16 | 2 | X6230 | 7.47 |
16 | 18 | 2 | X6231 | 11.18 |
18 | 20 | 2 | X6232 | 7.6 |
20 | 22 | 2 | X6233 | 9.62 |
CGT008 | 23 | 24 | 1 | X6234 | 15.45 |
CGT009 | 3 | 5 | 2 | X6235 | 14.29 |
18 | 20 | 2 | X6238 | 9.13 |
CGT010 | 20 | 22 | 2 | X6239 | 5.57 |
22 | 24 | 2 | X6240 | 7.11 |
CGT011 | 4 | 6 | 2 | X6243 | 17.15 |
33 | 34 | 1 | X6244 | 18.57 |
47 | 49 | 2 | X6245 | 14.27 |
CGT012 | 38 | 40 | 2 | X6247 | 15.64 |
40 | 42 | 2 | X6248 | 14.27 |
49 | 50 | 1 | X6249 | 25.08 |
57 | 59 | 2 | X6251 | 19.91 |
CGT015 | 10 | 12 | 2 | X6252 | 32.63 |
12 | 14 | 2 | X6253 | 31.89 |
18 | 19 | 1 | X6255 | 12.39 |
CGT018 | 12 | 14 | 2 | X6258 | 12.39 |
14 | 16 | 2 | X6259 | 16.39 |
16 | 18 | 2 | X6260 | 19.43 |
CGT019 | 19 | 21 | 2 | X6261 | 29.95 |
CGT021 | 15.37 | 16.57 | 1.2 | 89681 | 7.02 |
CGT022 | 17.2 | 18.4 | 1.2 | 89682 | 11.38 |
CGT023 | 2.1 | 3.5 | 1.4 | 89683 | 2.16 |
CGT027 | 49 | 51.2 | 2.2 | 89688 | 7.45 |
79.4 | 81.4 | 2 | 89687 | 13.46 |
81.4 | 82.9 | 1.5 | 89686 | 6.14 |
85.9 | 87.9 | 2 | 89685 | 3.29 |
87.9 | 88.9 | 1 | 89684 | 14.22 |
CGT029 | 91.7 | 93.7 | 2 | 89689 | 30.12 |
93.7 | 95 | 1.3 | 89690 | 25.91 |
97.55 | 98.55 | 1 | 89691 | 6.03 |
114.55 | 116.55 | 2 | 89692 | 32.89 |
116.55 | 118.95 | 2.4 | 89693 | 3.78 |
CGT030 | 25.2 | 31.9 | 6.7 | 89694 | 5.68 |
CGT031 | 26.5 | 28.5 | 2 | 89695 | 18.57 |
CGT032 | 40.05 | 42.05 | 2 | 89696 | 2.93 |
42.05 | 44.05 | 2 | 89697 | 3.53 |
44.05 | 46.05 | 2 | 89698 | 3.77 |
46.05 | 48.05 | 2 | 89699 | 2.23 |
48.05 | 48.9 | 0.85 | 89700 | 1.63 |
58.1 | 59.1 | 1 | 89608 | 2.24 |
67.8 | 68.7 | 0.9 | 89609 | 2.61 |
82.5 | 84.5 | 2 | 89610 | 5.89 |
84.5 | 85.6 | 1.1 | 89611 | 2.38 |
CGT033 | 26 | 26.8 | 0.8 | 89612 | 4.01 |
28.75 | 30.75 | 2 | 89613 | 2.96 |
30.75 | 32.75 | 2 | 89614 | 3.25 |
32.75 | 34.75 | 2 | 89615 | 4.55 |
34.75 | 36.45 | 1.7 | 89616 | 8.51 |
50.15 | 52.15 | 2 | 89617 | 1.53 |
52.15 | 54.15 | 2 | 89618 | 1.78 |
54.15 | 56.5 | 2.35 | 89619 | 1.76 |
74.6 | 75.9 | 1.3 | 89620 | 4.77 |
CGT034 | 16.55 | 17.95 | 1.4 | 89621 | 10.32 |
CGT035 | 19.4 | 19.8 | 0.4 | 89622 | 2.82 |
30.3 | 30.8 | 0.5 | 89623 | 3.25 |
31.6 | 32.1 | 0.5 | 89624 | 2.48 |
34.2 | 36.2 | 2 | 89625 | 7.41 |
37.85 | 40 | 2 | 89626 | 8.35 |
39.85 | 41.85 | 2 | 89627 | 22.61 |
41.85 | 43.85 | 2 | 89628 | 2.3 |
43.85 | 45.85 | 2 | 89629 | 2.13 |
45.85 | 47.85 | 2 | 89630 | 8.76 |
47.85 | 49.05 | 1.2 | 89631 | 7.81 |
56.8 | 57.4 | 0.6 | 89632 | 6.8 |
CGT036 | 40.05 | 41.2 | 1.15 | 89633 | 1.4 |
46.4 | 47 | 0.6 | 89634 | 6.95 |
52.8 | 54.8 | 2 | 89635 | 6.72 |
67.8 | 69.8 | 2 | 89636 | 9.9 |
69.8 | 71.6 | 1.8 | 89637 | 4.24 |
73.1 | 75.1 | 2 | 89638 | 3.43 |
75.1 | 77.1 | 2 | 89639 | 5.65 |
77.1 | 79.5 | 2.4 | 89640 | 2.92 |
87.9 | 89.2 | 1.3 | 89641 | 9.78 |
CGT040 | 41.3 | 43.3 | 2 | 89642 | 13.63 |
43.3 | 44.6 | 1.3 | 89643 | 10.5 |
CGT042 | 22.6 | 24.6 | 2 | 89644 | 9.65 |
24.6 | 27 | 2.4 | 89645 | 19.73 |
Table 4: Graphitic carbon assays from 8 of the 15 drillholes completed to date on the Capim Grosso Project in Brazil (all drillholes to date have intersected graphite). Drillcore was halved and samples taken according to visual grade estimation in one meter increments. Where visual grade was regarded as continuous, sampling was completed up to a maximum of 2 m increments. Internal QA/QC was performed by Gratomic inserting a Certified Reference Material (CRM) every 20 samples, (OREAS 725) which assayed within 97 % of the expected graphitic carbon value of the CRM. The QP therefore accepts the values of the laboratory assays. The intervals are regarded as true width (or as close as possible to) due to the dip of drillholes being perpendicular on measured dip of geology.
HOLE | FROM (m) | TO (m) | INTERVAL (m) | SAMPLE # | TGC (%) |
CGD001 | 14.45 | 15.9 | 1.45 | X6701 | 2.55 |
20.74 | 21.7 | 0.96 | X6702 | 3.68 |
21.7 | 22.7 | 1 | X6703 | 11.58 |
22.7 | 23.7 | 1 | X6704 | 7.23 |
23.7 | 24.9 | 1.2 | X6705 | 26 |
24.9 | 25.8 | 0.9 | X6706 | 21.76 |
25.8 | 27.05 | 1.25 | X6707 | 17.65 |
27.05 | 28.65 | 1.6 | X6708 | 23.61 |
28.65 | 29.65 | 1 | X6709 | 3.28 |
29.65 | 30.65 | 1 | X6710 | 4.33 |
30.65 | 31.9 | 1.25 | X6711 | 4.8 |
37.37 | 38.55 | 1.18 | X6712 | 10.11 |
39.6 | 40.47 | 0.87 | X6713 | 3.33 |
40.84 | 41.32 | 0.48 | X6714 | 3.08 |
CGD002 | 113.76 | 113.86 | 0.1 | X6716 | 4.5 |
114.35 | 114.45 | 0.1 | X6717 | 5.92 |
130.25 | 130.69 | 0.44 | X6719 | 8.42 |
CGD003 | 71.93 | 72.33 | 0.4 | X6719 | 4.41 |
72.33 | 73.53 | 1.2 | X6720 | 7.49 |
74.8 | 75.4 | 0.6 | X6721 | 8.24 |
79.85 | 80.2 | 0.35 | X6722 | 8.86 |
80.2 | 81.83 | 1.63 | X6723 | 2 |
CGD004 | 26.26 | 27.45 | 1.19 | X6724 | 3.11 |
59.24 | 59.43 | 0.19 | X6725 | 2.66 |
62.77 | 62.82 | 0.05 | X6726 | 37.9 |
63.95 | 64.15 | 0.2 | X6727 | 2.66 |
64.15 | 65.01 | 0.86 | X6728 | 4.02 |
CGD005 | 38.07 | 38.64 | 0.57 | X6729 | 13.54 |
38.64 | 39.64 | 1 | X6730 | 0.38 |
39.64 | 40 | 0.36 | X6731 | 0.16 |
40 | 40.98 | 0.98 | X6732 | 4.37 |
40.98 | 41.58 | 0.6 | X6733 | 22.16 |
47.23 | 47.53 | 0.3 | X6734 | 2.61 |
47.53 | 48.65 | 1.12 | X6735 | 10.15 |
49.62 | 50.95 | 1.33 | X6736 | 1.05 |
79.24 | 79.56 | 0.32 | X6738 | 9.13 |
CGD006 | 67.6 | 69.35 | 1.75 | X6739 | 3.47 |
70.45 | 70.8 | 0.35 | X6740 | 0.45 |
72.55 | 73.38 | 0.83 | X6741 | 3.91 |
73.38 | 75.39 | 2.01 | X6742 | 0.69 |
77.23 | 78.23 | 1 | X6743 | 3.62 |
78.23 | 78.75 | 0.52 | X6744 | 6.42 |
78.75 | 79.95 | 1.2 | X6745 | 6.99 |
79.95 | 81.11 | 1.16 | X6746 | 11.56 |
CGD007 | 16.4 | 17.76 | 1.36 | X6747 | 3.84 |
23.25 | 24.7 | 1.45 | X6748 | 10.89 |
45.07 | 45.37 | 0.3 | X6749 | 1.94 |
50.25 | 51.25 | 1 | X6750 | 3.94 |
51.25 | 52.25 | 1 | X6751 | 3.78 |
52.25 | 53.25 | 1 | X6752 | 4.08 |
53.25 | 54.25 | 1 | X6753 | 5.09 |
54.25 | 55.25 | 1 | X6754 | 4.34 |
55.25 | 56.25 | 1 | X6755 | 2.47 |
56.25 | 56.8 | 0.55 | X6756 | 0.15 |
56.8 | 58.05 | 1.25 | X6758 | 5.2 |
58.05 | 58.68 | 0.63 | X6759 | 5.83 |
64.98 | 65.91 | 0.93 | X6760 | 6.13 |
91.4 | 92.7 | 1.3 | X6761 | 3.54 |
CGD008 | 6.2 | 7.2 | 1 | X6762 | 4.33 |
7.2 | 8.2 | 1 | X6763 | 1.62 |
8.2 | 9.2 | 1 | X6764 | 3.66 |
9.2 | 10.2 | 1 | X6765 | 7.59 |
10.2 | 11.2 | 1 | X6766 | 8.61 |
11.2 | 12.2 | 1 | X6767 | 10.77 |
12.2 | 13.2 | 1 | X6768 | 2.9 |
13.2 | 14.2 | 1 | X6769 | 2.85 |
14.2 | 15.2 | 1 | X6770 | 2.47 |
15.2 | 16.05 | 0.85 | X6771 | 5.22 |
16.55 | 18.55 | 2 | X6772 | 3.5 |
20.55 | 21.75 | 1.2 | X6773 | 2.16 |
21.75 | 22.75 | 1 | X6774 | 0.89 |
29.35 | 29.95 | 0.6 | X6775 | 1.3 |
Qualified Persons
Nico Scholtz is a consulting geologist and has reviewed and approved the scientific and technical information in this news release. Mr. Scholtz is a registered Professional Natural Scientist with the South African Council for Natural Scientific Professions (Pr. Sci. Nat. No. 400299/07). Mr. Scholtz is the Company's "Qualified Person" as defined by NI 43-101.
About Gratomic
Gratomic is a multinational company with projects in Namibia, Brazil, and Canada. The Company is focused on becoming a leading global graphite supplier and aims to secure a strong position in the EV (Electric Vehicle) battery supply chain. With the continued development of its flagship Aukam project and further exploration on the Company's Capim Grosso property, Gratomic sets itself apart by seeking out unique top-quality assets around the world. True to its roots, the Company will continue to explore graphite opportunities displaying potential for development. The Company ranked third place in the top 10 preforming mining stocks on the 2022 TSX Venture 50™.
Large quantities of high-quality vein graphite have been shipped for testing to confirm its viability as an anode material. Gratomic is confident that the test results will provide a unique competitive advantage in its desired target markets. The Company will continue to update the public on the status of these tests and will provide results as soon as they become available.
The Company has formed a collaboration agreement with Forge Nano. With its patented ALD (Atomic Layer Deposition) coating, this cooperation with Forge Nano is a key element to support Gratomic's strategies towards the value-added phases of production of graphite for anode applications, namely micronization, spheronization and coating, making Gratomic graphite a preferred choice for use in lithium-ion batteries.
For more information: visit the website at or contact:
Arno Brand at abrand@gratomic.ca or (416) 561- 4095
Subscribe at gratomic.ca/contact/ to be added to our email list.
For Marketing and Media information, please email: info@gratomic.ca
"Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release."
Forward Looking Statements:
This news release contains forward-looking statements, which relate to future events or future performance and reflect management's current expectations and assumptions. Such forward-looking statements reflect management's current beliefs and are based on assumptions made by and information currently available to the Company. Investors are cautioned that these forward-looking statements are neither promises nor guarantees and are subject to risks and uncertainties that may cause future results to differ materially from those expected. These forward-looking statements are made as of the date hereof and, except as required under applicable securities legislation, the Company does not assume any obligation to update or revise them to reflect new events or circumstances. All of the forward-looking statements made in this press release are qualified by these cautionary statements and by those made in our filings with SEDAR in Canada (available at )
SOURCE: Gratomic Inc.
View source version on accesswire.com:
トロント、/ACCESSWIRE/2022年5月2日/グリコ原子社です(“Grtom”、“GRAT”または“会社”)(トロント証券取引所-V:GRAT)(OTCQX:CBULF)(フランクフルト証券取引所:CB 82)Capim Grosso黒鉛プロジェクト5000メートル掘削活動中の1,734.30メートルが完成したことを発表した。これまでに15個のダイヤモンド掘削が完了しており,他の2つが進行中である。このプロジェクトはブラジルのバイア州に位置し、会社はこの物件の100%の持株権を持っている。
この日付が2022年2月23日のプレスリリースによると、2つ目のドリルの導入は掘削速度を加速させ、2022年2月以来現場にいた。
表1:ブラジルCapim Grossoプロジェクトがこれまでに完成したドリル(WS 84 UTM 24 S)
名前.名前 | X | Y | Z | 方位角 | 浸漬する | EOH |
CGD 001 | 391942 | 8749876 | 381 | 45 | -58 | 100.10 |
CGD 002 | 391867 | 8749905 | 382 | 50 | -60 | 141.20 |
CGD 003 | 391926 | 8749863 | 381 | 50 | -60 | 120.55 |
CGD 004 | 391842 | 8749975 | 381 | 50 | -60 | 93.15 |
CGD 005 | 391775 | 8750076 | 378 | 50 | -60 | 111.00 |
CGD 006 | 391722 | 8750171 | 378 | 50 | -60 | 120.65 |
CGD 007 | 391626 | 8750343 | 375 | 50 | -60 | 120.20 |
CGD 008 | 391755 | 8750196 | 376 | 50 | -60 | 100.05 |
CGD 009 | 391603 | 8750328 | 376 | 50 | -60 | 120.00 |
CGD 010 | 391597 | 8750372 | 375 | 50 | -60 | 141.00 |
CGD 011 | 391574 | 8750352 | 376 | 50 | -60 | 140.05 |
CGD 012 | 391533 | 8750454 | 373 | 50 | -60 | 134.65 |
CGD 013 | 391431 | 8750595 | 373 | 50 | -60 | 140.70 |
CGD 014 | 391392 | 8750562 | 376 | 50 | -60 | 151.00 |
CGD 015 | 391336 | 8750756 | 371 | 50 | -60 | 206.90 |
ブラジルのSGS GeosolからCapim Grossoプロジェクトから最初の掘削分析を受けた
内部認証標準物質が3つ含まれている75回のアッセイ
表2:表2にブラジルCapim Grosso項目の前8掘削の間隔(1%のTGC下限品位と3%の最低TGC品位を用いた)を強調した。以下の表4に8つの穴の解析結果のより詳細な情報を示す.内部品質保証/品質制御は,20試料(OREAS 725)ごとに1つの認証された標準物質(CRM)を挿入して内部品質保証/品質制御を行い,これらの試料の分析結果はCRMの期待黒鉛化炭素値の97%以内であった。したがって、QPは実験室アッセイの値を受け入れる。これらの間隔は、掘削傾斜角が測定された地質傾斜角に対して垂直であるため、真の幅(または可能な限り近い)と考えられる。
Dh_孔 | Dh_from (m) | Dh_to (m) | 長さ(メートル) | 総黒鉛化炭素(TGC) (%) |
CGD 001 | 20.74 | 31.90 | 11.16 | 13.13 |
37.37 | 38.55 | 1.18 | 10.11 |
39.60 | 40.47 | 0.87 | 3.33 |
40.84 | 41.32 | 0.48 | 3.08 |
CGD 002 | 114.35 | 114.45 | 0.10 | 5.92 |
130.25 | 130.69 | 0.44 | 8.42 |
CGD 003 | 71.93 | 73.53 | 1.60 | 6.72 |
74.80 | 75.40 | 0.60 | 8.24 |
79.85 | 81.83 | 1.98 | 3.21 |
CGD 004 | 26.26 | 27.45 | 1.19 | 3.11 |
63.95 | 65.01 | 1.06 | 3.76 |
CGD 005 | 38.07 | 38.64 | 0.57 | 13.54 |
40.00 | 41.58 | 1.58 | 11.13 |
47.23 | 48.65 | 1.42 | 8.56 |
79.24 | 79.56 | 0.32 | 9.13 |
CGD 006 | 67.60 | 69.35 | 1.75 | 3.47 |
72.55 | 73.38 | 0.83 | 3.91 |
77.23 | 81.11 | 3.88 | 7.41 |
CGD 007 | 16.40 | 17.76 | 1.36 | 3.84 |
23.25 | 24.70 | 1.45 | 10.89 |
50.25 | 56.25 | 6.00 | 3.95 |
56.80 | 58.68 | 1.88 | 5.41 |
64.98 | 65.91 | 0.93 | 6.13 |
91.40 | 92.70 | 1.30 | 3.54 |
CGD 008 | 6.20 | 16.05 | 9.85 | 5.00 |
16.55 | 18.55 | 2.00 | 3.50 |
SGS Geosolの黒鉛炭素分析方法及び装置は、LECO炭素硫黄分析装置及び高温燃焼赤外線検出器を含む。この過程で,試料中の炭素は二酸化炭素二酸化炭素に変換され,赤外(IR)検出器で測定された。
掘削が完了し、すべての掘削が分析されると、会社は、国家機器43−101の要求に応じて最新の鉱物資源評価を生成するために、取得されたデータを処理することを意図している−“鉱物プロジェクト情報開示基準”("NI 43-101Capim Grosso資産については、試験冶金テストデータと他の関連情報と結合し、実行可能性研究(FS)を生成し、プロジェクト開発を迅速に追跡する。
以下の表にこれまでにCapim Grosso Propertyから得られた全黒鉛炭素(TGC)(%)分析結果を示す
表3:ブラジルCapim Grossoプロジェクトで完成した42トレンチについて黒鉛炭素分析を行った(14トレンチは黒鉛と交わらなかった)。坑壁の水平連続断面では,視覚レベルから推定し,2メートル単位で溝をサンプリングした。視覚レベルが連続していると考えられる場合、サンプリングは最大6 mの増分に達する。GRATIALは内部QA/QCを行っていないが,SGSは独自の標準物質を挿入しており,これらの標準物質の分析結果は標準物質の期待黒鉛化炭素値の90%以内である。したがって、QPは実験室アッセイの値を受け入れる。これらの海溝は現地の岩性走行上で垂直に近い場合に掘削されているが,各海溝の傾斜角が岩性傾斜角と垂直であることは不可能である。
塹壕番号 | 送信者(M) | (M)まで | 間隔(M) | 見本番号 | TGC(%) |
CVT 001 | 20 | 22 | 2 | X6201 | 21.65 |
26 | 28 | 2 | X6202 | 19.14 |
CCG 002 | 8 | 10 | 2 | X6203 | 27.3 |
16 | 18 | 2 | X6204 | 20.37 |
23 | 24 | 1 | X6206 | 41.79 |
27 | 28 | 1 | X6207 | 7.94 |
CVT 004 | 14 | 15 | 1 | X6209 | 16.2 |
30 | 31 | 1 | X6210 | 3.89 |
CCG 005 | 35 | 36 | 1 | X6213 | 11.39 |
CCG 006 | 15 | 16 | 1 | X6215 | 0.57 |
16 | 18 | 2 | X6216 | 4.58 |
18 | 20 | 2 | X6217 | 8.34 |
20 | 22 | 2 | X6218 | 14.04 |
32 | 34 | 2 | X6222 | 11.74 |
34 | 36 | 2 | X6223 | 9.32 |
36 | 38 | 2 | X6224 | |
16 | 22 | 6 | X6225 | 8.45 |
32 | 36 | 4 | X6226 | 6.4 |
CCG 007 | 0 | 2 | 2 | X6227 | 6.66 |
2 | 4 | 2 | X6228 | 13.33 |
4 | 6 | 2 | X6229 | 25.04 |
14 | 16 | 2 | X6230 | 7.47 |
16 | 18 | 2 | X6231 | 11.18 |
18 | 20 | 2 | X6232 | 7.6 |
20 | 22 | 2 | X6233 | 9.62 |
CCG 008 | 23 | 24 | 1 | X6234 | 15.45 |
CCG 009 | 3 | 5 | 2 | X6235 | 14.29 |
18 | 20 | 2 | X6238 | 9.13 |
CCG 010 | 20 | 22 | 2 | X6239 | 5.57 |
22 | 24 | 2 | X6240 | 7.11 |
CCG 011 | 4 | 6 | 2 | X6243 | 17.15 |
33 | 34 | 1 | X6244 | 18.57 |
47 | 49 | 2 | X6245 | 14.27 |
CCG 012 | 38 | 40 | 2 | X6247 | 15.64 |
40 | 42 | 2 | X6248 | 14.27 |
49 | 50 | 1 | X6249 | 25.08 |
57 | 59 | 2 | X6251 | 19.91 |
CCG 015 | 10 | 12 | 2 | X6252 | 32.63 |
12 | 14 | 2 | X6253 | 31.89 |
18 | 19 | 1 | X6255 | 12.39 |
CCG 018 | 12 | 14 | 2 | X6258 | 12.39 |
14 | 16 | 2 | X6259 | 16.39 |
16 | 18 | 2 | X6260 | 19.43 |
CCG 019 | 19 | 21 | 2 | X6261 | 29.95 |
CCG 021 | 15.37 | 16.57 | 1.2 | 89681 | 7.02 |
CCG 022 | 17.2 | 18.4 | 1.2 | 89682 | 11.38 |
CCG 023 | 2.1 | 3.5 | 1.4 | 89683 | 2.16 |
CCG 027 | 49 | 51.2 | 2.2 | 89688 | 7.45 |
79.4 | 81.4 | 2 | 89687 | 13.46 |
81.4 | 82.9 | 1.5 | 89686 | 6.14 |
85.9 | 87.9 | 2 | 89685 | 3.29 |
87.9 | 88.9 | 1 | 89684 | 14.22 |
CCG 029 | 91.7 | 93.7 | 2 | 89689 | 30.12 |
93.7 | 95 | 1.3 | 89690 | 25.91 |
97.55 | 98.55 | 1 | 89691 | 6.03 |
114.55 | 116.55 | 2 | 89692 | 32.89 |
116.55 | 118.95 | 2.4 | 89693 | 3.78 |
CCG 030 | 25.2 | 31.9 | 6.7 | 89694 | 5.68 |
CCG 031 | 26.5 | 28.5 | 2 | 89695 | 18.57 |
CCG 032 | 40.05 | 42.05 | 2 | 89696 | 2.93 |
42.05 | 44.05 | 2 | 89697 | 3.53 |
44.05 | 46.05 | 2 | 89698 | 3.77 |
46.05 | 48.05 | 2 | 89699 | 2.23 |
48.05 | 48.9 | 0.85 | 89700 | 1.63 |
58.1 | 59.1 | 1 | 89608 | 2.24 |
67.8 | 68.7 | 0.9 | 89609 | 2.61 |
82.5 | 84.5 | 2 | 89610 | 5.89 |
84.5 | 85.6 | 1.1 | 89611 | 2.38 |
CCG 033 | 26 | 26.8 | 0.8 | 89612 | 4.01 |
28.75 | 30.75 | 2 | 89613 | 2.96 |
30.75 | 32.75 | 2 | 89614 | 3.25 |
32.75 | 34.75 | 2 | 89615 | 4.55 |
34.75 | 36.45 | 1.7 | 89616 | 8.51 |
50.15 | 52.15 | 2 | 89617 | 1.53 |
52.15 | 54.15 | 2 | 89618 | 1.78 |
54.15 | 56.5 | 2.35 | 89619 | 1.76 |
74.6 | 75.9 | 1.3 | 89620 | 4.77 |
CCG 034 | 16.55 | 17.95 | 1.4 | 89621 | 10.32 |
CCG 035 | 19.4 | 19.8 | 0.4 | 89622 | 2.82 |
30.3 | 30.8 | 0.5 | 89623 | 3.25 |
31.6 | 32.1 | 0.5 | 89624 | 2.48 |
34.2 | 36.2 | 2 | 89625 | 7.41 |
37.85 | 40 | 2 | 89626 | 8.35 |
39.85 | 41.85 | 2 | 89627 | 22.61 |
41.85 | 43.85 | 2 | 89628 | 2.3 |
43.85 | 45.85 | 2 | 89629 | 2.13 |
45.85 | 47.85 | 2 | 89630 | 8.76 |
47.85 | 49.05 | 1.2 | 89631 | 7.81 |
56.8 | 57.4 | 0.6 | 89632 | 6.8 |
CCG 036 | 40.05 | 41.2 | 1.15 | 89633 | 1.4 |
46.4 | 47 | 0.6 | 89634 | 6.95 |
52.8 | 54.8 | 2 | 89635 | 6.72 |
67.8 | 69.8 | 2 | 89636 | 9.9 |
69.8 | 71.6 | 1.8 | 89637 | 4.24 |
73.1 | 75.1 | 2 | 89638 | 3.43 |
75.1 | 77.1 | 2 | 89639 | 5.65 |
77.1 | 79.5 | 2.4 | 89640 | 2.92 |
87.9 | 89.2 | 1.3 | 89641 | 9.78 |
CCG 040 | 41.3 | 43.3 | 2 | 89642 | 13.63 |
43.3 | 44.6 | 1.3 | 89643 | 10.5 |
CCG 042 | 22.6 | 24.6 | 2 | 89644 | 9.65 |
24.6 | 27 | 2.4 | 89645 | 19.73 |
表4:ブラジルCapim Grossoプロジェクトでこれまでに完成した15個の掘削孔のうち8つについて黒鉛炭素分析を行った(これまですべての掘削孔が黒鉛と交差していた)。掘削コアは半減され,目視レベルから1メートル単位で試料を採取すると推定された。視覚階層が連続していると考えられる場合,サンプリングは最大2 mの増分に達する.内部品質保証/品質制御は,20試料(OREAS 725)ごとに1つの認証された標準物質(CRM)を挿入して内部品質保証/品質制御を行い,これらの試料の分析結果はCRMの期待黒鉛化炭素値の97%以内であった。したがって、QPは実験室アッセイの値を受け入れる。これらの間隔は、掘削傾斜角が測定された地質傾斜角に対して垂直であるため、真の幅(または可能な限り近い)と考えられる。
穴穴 | 送信者(M) | (M)まで | 間隔(M) | 見本番号 | TGC(%) |
CGD 001 | 14.45 | 15.9 | 1.45 | X6701 | 2.55 |
20.74 | 21.7 | 0.96 | X6702 | 3.68 |
21.7 | 22.7 | 1 | X6703 | 11.58 |
22.7 | 23.7 | 1 | X6704 | 7.23 |
23.7 | 24.9 | 1.2 | X6705 | 26 |
24.9 | 25.8 | 0.9 | X6706 | 21.76 |
25.8 | 27.05 | 1.25 | X6707 | 17.65 |
27.05 | 28.65 | 1.6 | X6708 | 23.61 |
28.65 | 29.65 | 1 | X6709 | 3.28 |
29.65 | 30.65 | 1 | X6710 | 4.33 |
30.65 | 31.9 | 1.25 | X6711 | 4.8 |
37.37 | 38.55 | 1.18 | X6712 | 10.11 |
39.6 | 40.47 | 0.87 | X6713 | 3.33 |
40.84 | 41.32 | 0.48 | X6714 | 3.08 |
CGD 002 | 113.76 | 113.86 | 0.1 | X6716 | 4.5 |
114.35 | 114.45 | 0.1 | X6717 | 5.92 |
130.25 | 130.69 | 0.44 | X6719 | 8.42 |
CGD 003 | 71.93 | 72.33 | 0.4 | X6719 | 4.41 |
72.33 | 73.53 | 1.2 | X6720 | 7.49 |
74.8 | 75.4 | 0.6 | X6721 | 8.24 |
79.85 | 80.2 | 0.35 | X6722 | 8.86 |
80.2 | 81.83 | 1.63 | X6723 | 2 |
CGD 004 | 26.26 | 27.45 | 1.19 | X6724 | 3.11 |
59.24 | 59.43 | 0.19 | X6725 | 2.66 |
62.77 | 62.82 | 0.05 | X6726 | 37.9 |
63.95 | 64.15 | 0.2 | X6727 | 2.66 |
64.15 | 65.01 | 0.86 | X6728 | 4.02 |
CGD 005 | 38.07 | 38.64 | 0.57 | X6729 | 13.54 |
38.64 | 39.64 | 1 | X6730 | 0.38 |
39.64 | 40 | 0.36 | X6731 | 0.16 |
40 | 40.98 | 0.98 | X6732 | 4.37 |
40.98 | 41.58 | 0.6 | X6733 | 22.16 |
47.23 | 47.53 | 0.3 | X6734 | 2.61 |
47.53 | 48.65 | 1.12 | X6735 | 10.15 |
49.62 | 50.95 | 1.33 | X6736 | 1.05 |
79.24 | 79.56 | 0.32 | X6738 | 9.13 |
CGD 006 | 67.6 | 69.35 | 1.75 | X6739 | 3.47 |
70.45 | 70.8 | 0.35 | X6740 | 0.45 |
72.55 | 73.38 | 0.83 | X6741 | 3.91 |
73.38 | 75.39 | 2.01 | X6742 | 0.69 |
77.23 | 78.23 | 1 | X6743 | 3.62 |
78.23 | 78.75 | 0.52 | X6744 | 6.42 |
78.75 | 79.95 | 1.2 | X6745 | 6.99 |
79.95 | 81.11 | 1.16 | X6746 | 11.56 |
CGD 007 | 16.4 | 17.76 | 1.36 | X6747 | 3.84 |
23.25 | 24.7 | 1.45 | X6748 | 10.89 |
45.07 | 45.37 | 0.3 | X6749 | 1.94 |
50.25 | 51.25 | 1 | X6750 | 3.94 |
51.25 | 52.25 | 1 | X6751 | 3.78 |
52.25 | 53.25 | 1 | X6752 | 4.08 |
53.25 | 54.25 | 1 | X6753 | 5.09 |
54.25 | 55.25 | 1 | X6754 | 4.34 |
55.25 | 56.25 | 1 | X6755 | 2.47 |
56.25 | 56.8 | 0.55 | X6756 | 0.15 |
56.8 | 58.05 | 1.25 | X6758 | 5.2 |
58.05 | 58.68 | 0.63 | X6759 | 5.83 |
64.98 | 65.91 | 0.93 | X6760 | 6.13 |
91.4 | 92.7 | 1.3 | X6761 | 3.54 |
CGD 008 | 6.2 | 7.2 | 1 | X6762 | 4.33 |
7.2 | 8.2 | 1 | X6763 | 1.62 |
8.2 | 9.2 | 1 | X6764 | 3.66 |
9.2 | 10.2 | 1 | X6765 | 7.59 |
10.2 | 11.2 | 1 | X6766 | 8.61 |
11.2 | 12.2 | 1 | X6767 | 10.77 |
12.2 | 13.2 | 1 | X6768 | 2.9 |
13.2 | 14.2 | 1 | X6769 | 2.85 |
14.2 | 15.2 | 1 | X6770 | 2.47 |
15.2 | 16.05 | 0.85 | X6771 | 5.22 |
16.55 | 18.55 | 2 | X6772 | 3.5 |
20.55 | 21.75 | 1.2 | X6773 | 2.16 |
21.75 | 22.75 | 1 | X6774 | 0.89 |
29.35 | 29.95 | 0.6 | X6775 | 1.3 |
合格者
ニコ·ショルツは諮問地質学者で、本プレスの科学と技術情報を審査し、承認した。ショルツさんは南アフリカ自然科学専門理事会の登録専門自然科学者(広報)である。SCIです。ナット。400299/07)。ショルツさんは、NI 43-101で定義されている会社の“合格者”です.
GrATIALについて
Gratomは多国籍企業で、ナミビア、ブラジル、カナダでプロジェクトを持っている。同社は世界有数の黒鉛サプライヤーとなることに力を入れており、電気自動車(EV)電池サプライチェーンで有利な地位を占めることを目指している。その旗艦プロジェクトAukamの持続的な発展と会社Capim Grosso資産の更なる探査に伴い、Grtomは世界各地で独特なトップ資産を探すことで頭角を現した。会社はいつものように、発展の潜在力のあるグラファイトのビジネスチャンスを発掘し続ける。同社は2022年トロント証券取引所創業ボード50™上位10大鉱業株の中で3位にランクインした。
大量の高品質の脈状黒鉛はすでに現場に運ばれてテストを行い、陽極材料としての実行可能性を確認した。Grtomは、テスト結果がその期待される目標市場で独特な競争優位性を提供すると信じている。同社はこれらのテストの最新状況を引き続き公衆に通報し、結果を得た後にできるだけ早く提供する。
その会社はForge Nanoと協力合意に達した。特許を取得したALD(原子層堆積)コーティングにより,Forge Nanoとの協力は,Grtomが負極応用のための黒鉛製造の付加価値段階である微粉化,円球化,コーティングの戦略を支援することを支持する重要な要因であり,Gratic黒鉛をリチウムイオン電池のための第一選択としている。
詳細については、以下を参照のことウェブサイトや連絡先にアクセスする:
Arno Brand Eメール:abrand@gratomic.caまたは(416)561-4095
こちらの電子メーリングリストに追加する場合は、grauomic.ca/Contact/購読にアクセスしてください。
マーケティングやメディア情報を知りたい場合は、info@grateomic.caに電子メールを送ってください
トロント証券取引所リスク取引所およびその監督サービス提供者(この用語はトロント証券取引所の政策において定義されている)は、本プレスリリースの十分性または正確性に責任を負わない“と述べた
前向きに述べた
本プレスリリースは展望性陳述を含み、これらの陳述は未来の事件或いは未来の業績と関係があり、管理層の現在の期待と仮定を反映している。これらの前向き陳述は、経営陣の現在の信念を反映しており、会社が行った仮説と現在入手可能な情報に基づいている。投資家は、これらの展望性陳述は約束でも保証でもなく、リスクと不確定要素の影響を受ける可能性があり、これらのリスクと不確定要素は未来の結果と予想とは大きく異なる可能性があることに注意してください。これらの展望的陳述は、本プレスリリースの発表日から行われ、適用される証券法規が別途要求されない限り、会社は、新しい事件または新しい状況を反映するためにこれらの陳述を更新または改訂する義務を負わない。本プレスリリースで作成されたすべての前向き声明は、これらの警告声明と、カナダSEDARに提出された我々の文書に記載されている警告声明とによって制限される(可能性がある)
資料源:グリコ原子社です。
Accesswire.comでソースコードバージョンを表示する: