share_log

Faraday Copper Reports 17.70 Metres at 0.96% Copper and 0.12 G/t Gold Within 101.31 Metres at 0.45% Copper at Copper Creek in Arizona

Faraday Copper Reports 17.70 Metres at 0.96% Copper and 0.12 G/t Gold Within 101.31 Metres at 0.45% Copper at Copper Creek in Arizona

法拉第銅業報告稱,亞利桑那州銅溪的銅含量爲17.70米,銅含量爲0.96%,101.31米以內爲0.12 g/T黃金,銅含量爲0.45%
Accesswire ·  2023/07/12 06:05

VANCOUVER, BC / ACCESSWIRE / July 12, 2023 / Faraday Copper Corp. ("Faraday" or the "Company") (TSX:FDY)(OTCQX:CPPKF) is pleased to announce the results from six drill holes at its Copper Creek Project, located in Arizona, U.S. ("Copper Creek"). The holes were drilled to target the potential expansion of the open pit mineral resources.

不列顛哥倫比亞省溫哥華/ACCESSWIRE/2023年7月12日/法拉第銅業公司(“法拉第“或”公司)(多倫多證券交易所股票代碼:FDY)(場外交易市場代碼:CPPKF)很高興地宣佈其位於美國亞利桑那州的銅溪專案(以下簡稱“銅溪”)的六個鑽孔的結果。

Paul Harbidge, President and CEO, commented "The results from our Phase II drill program continue to show the exploration upside to the existing resource that formed the basis for the PEA. Three drill holes have identified the opportunity to expand the near-surface mineral resource along the eastern breccia trend and combine two open pits. Additionally, we have identified the potential for payable gold at the Pole breccia."

總裁首席執行官兼首席執行官保羅·哈比奇表示:“我們第二階段鑽探計劃的結果繼續顯示,構成PEA基礎的現有資源的勘探優勢。三個鑽探已經確定了沿著東部角礫巖趨勢擴大近地表礦產資源的機會,並將兩個露天礦場結合在一起。此外,我們已經確定了極地角礫巖的可支付黃金的潛力。”

"With our Phase II drill program now completed and the results from 26 of 28 holes released, our focus in the third quarter will be on integrating and analyzing airborne magnetic, electromagnetic, drill core, geochemical and spectral data to rank and prioritize targets for a 20,000-metre Phase III drill program planned to commence in the fourth quarter of 2023. We are continuing to analyze historical drill core for gold and will be commencing a metallurgical program shortly. We look forward to providing updates as results are received."

隨著我們的第二階段鑽探計劃已經完成,28個孔中的26個孔的結果已經公佈,我們在第三季度的重點將是整合和分析航空磁力、電磁、鑽芯、地球化學和光譜數據,以對計劃於2023年第四季度開始的2萬米長的第三階段鑽探計劃的目標進行排名和優先排序。我們正在繼續分析歷史上的鑽芯中的黃金,並將很快啟動冶金計劃。我們期待著在收到結果時提供最新情況。

Highlights

亮點

  • Intersected 101.31 metres ("m") at 0.45% copper and 6.69 g/t silver from surface, including 17.70 m at 0.96% copper, 3.33 g/t silver and 0.12 g/t gold from 68.16 m in drill hole FCD-23-032 at the Pole breccia.
  • Intersected 42.03 m at 0.35% copper and 2.99 g/t silver from 74.03 m and 28.97 m at 0.24% copper and 0.99 g/t silver from 130.83 m in drill hole FCD-23-033 at the Pole breccia, outside of the Mineral Resource Estimate ("MRE").
  • Intersected 43.29 m at 0.29% copper and 1.13 g/t silver from 75.58 m at the B-24 breccia in drill hole FCD-23-034, outside of the MRE.
  • These three drill holes demonstrate the potential for near-surface resource expansion between the Copper Prince and Mammoth open pit shells.
  • 以0.45%銅和6.69克/噸銀從表面相交101.31米(“米”),包括17.70米,銅0.96%,銀3.33克/噸,金0.12克/噸從68.16米處的FCD-23-032號鑽孔,在極地角礫巖。
  • 在極角礫巖的FCD-23-033號鑽孔,在礦產資源評估之外,以0.35%銅和2.99克/噸銀從74.03米和28.97米以0.24%銅和0.99克/噸銀相交42.03米。
  • 在FCD-23-034鑽孔的B-24角礫巖中,以0.29%的銅和1.13g/t的銀從75.58m相交43.29米,位於MRE之外。
  • 這三個鑽孔證明瞭銅王子和猛獁象露天礦場貝殼之間的近地表資源擴展潛力。

(For true width information see Table 1)

(有關真實寬度資訊,請參見表1)

Drill hole FCD-23-032 was collared west of the Pole breccia and drilled to the northeast at a 50-degree dip (Figures 1 and 2). The mineralization starts from surface and occurs in sheeted veins and transitions into mineralized hydrothermal breccia from 68.16 m to 85.86 m. The Pole breccia is situated between the Copper Prince and Mammoth open pit shells used to constrain the MRE.

FCD-23-032鑽孔在極地角礫巖以西有套鑽頭,向東北傾斜50度(圖1和圖2)。礦化始於地表,賦存於片狀礦脈中,從68.16m到85.86m過渡為礦化熱液角礫巖。極角角礫巖位於銅王子和猛獁象露天礦殼之間,用於約束MRE。

Drill hole FCD-23-033 was collared west of the Pole breccia and drilled to the northeast, at a steeper angle than FCD-23-032, to test the southwestward extension of the vein-hosted mineralization surrounding the Pole breccia (Figures 1 and 2). The hole intersected three mineralized intervals, of which two, totalling 70.00 m, are located outside the MRE pit shell. Both holes drilled at the Pole breccia demonstrate the potential for resource expansion and open pit consolidation along the eastern breccia trend, which includes the Copper Prince and Mammoth breccias.

FCD-23-033號鑽孔在極地角礫巖以西被套住,並以比FCD-23-032更陡峭的角度向東北鑽探,以測試極地角礫巖周圍礦脈賦存的礦化向西南延伸(圖1和圖2)。該孔與三個礦化區段相交,其中兩個礦化區段位於MRE坑殼外,總長70.00米。在極地角礫巖鑽探的兩個孔都顯示出沿著東部角礫巖趨勢的資源擴張和露天開採整合的潛力,其中包括銅王子角礫巖和猛獁角礫巖。

Drill hole FCD-23-034 was collared west of B-24 breccia and includes two mineralized intersections in an area between the Copper Prince and Mammoth open pit shells previously considered as waste in the MRE (Figures 1 and 2). The hole ends in mineralization and has the potential to connect these two resource pits.

FCD-23-034鑽孔該礦藏位於B-24角礫巖以西,包括銅王子礦和猛獁象露天礦貝殼之間區域的兩個礦化交叉點,此前被認為是地雷危險環境中的廢物(圖1和圖2)。該洞以礦化為終點,具有連接這兩個資源坑的潛力。

Drill hole FCD-23-030 was collared in the previously undrilled Rye area and drilled to the northwest (Figure 1). This hole intersected short intervals of igneous cemented breccia and several zones of disseminated pyrite including one at a grade of 1.00 g/t silver over 22.30 m from 242.49 m in a sericite altered granodiorite porphyry. The abundance of pyrite, which commonly occurs above copper bearing sulphides in an outer alteration halo, suggests that the hole remained in the shallow portions of the mineral system. The area warrants additional drilling.

FCD-23-030鑽孔在之前未鑽探的黑麥區被套上項圈,並向西北方向鑽探(圖1)。該孔在距絹雲母蝕變花崗閃長斑岩242.49米處,穿過短的火成岩膠結角礫巖和多個浸染黃鐵礦帶,其中一個含銀1.00g/t,超過22.30m。黃鐵礦的丰度通常出現在外部蝕變暈中含銅硫化物的上方,這表明該洞仍留在礦物系統的淺部。這一地區需要額外的鑽探。

Drill hole FCD-23-031 was collared in the Rye area and drilled to the south (Figure 1). It intersected granodiorite porphyry in the upper half of the hole and veinlets containing pyrite cutting glory hole volcanics in the lower half of the hole. No copper mineralization was identified.

FCD-23-031號鑽孔在黑麥地區被套上項圈,向南鑽探(圖1)。它在洞的上半部穿過花崗閃長斑岩,在洞的下半部與含有黃鐵礦的細脈相交,切割出光輝的洞火山岩。未發現銅礦化。

Drill hole FCD-23-035 was collared east of Copper Knight breccia and drilled towards the east to test a previously undrilled breccia target (Figure 1). It intersected an approximately 39-metre-wide zone of elevated copper from 84.80 m at 0.11% copper and 0.45 g/t silver associated with intense sericite alteration affecting granodiorite and breccia zones. Although this hole did not identify mineralization above the cut off grade used for the MRE, the results indicate that this area remains prospective for copper mineralization and merits follow-up.

FCD-23-035鑽孔在銅騎士角礫巖以東被套住,並向東鑽探,以測試以前未鑽探的角礫巖目標(圖1)。它與84.80米寬的高銅相交,銅含量為0.11%,銀含量為0.45克/噸,並伴有強烈的絹雲母蝕變,影響花崗閃長巖帶和角礫巖帶。雖然這個洞沒有發現高於MRE截止品位的礦化,但結果表明,該地區仍有銅礦成礦前景,值得進行後續研究。

Figure 1: Plan View Showing Drill Holes Reported in this News Release

圖1:顯示本新聞稿中報告的鑽孔的平面圖

Note: The open pit shell is based on constraints used in the MRE as presented in the report titled "Copper Creek Project NI 43-101 Technical Report and Preliminary Economic Assessment" with an effective date of May 3, 2023 available on the Company's website at and on the Company's SEDAR profile at .

注:露天礦殼體基於《銅溪專案NI 43-101技術報告及初步經濟評估》報告中所述的限制條件,該報告的生效日期為2023年5月3日,可在公司網站上查閱:和該公司的SEDAR簡介,網址為

Figure 2: Long Section Showing Drill Holes FCD-23-032, FCD-23-033 and FCD-23-034

圖2:顯示鑽孔FCD-23-032、FCD-23-033和FCD-23-034的長段

Table 1: Selected Drill Results from Copper Creek

表1:來自銅溪的選定鑽探結果

Drill Hole ID

From

To

Length

True Width

Cu

Mo

Au

Ag

(m)

(m)

(m)

(m)

(%)

(%)

(g/t)

(g/t)

FCD-23-032

0.00

101.31

101.31

72

0.45

0.002

0.04

6.69

including

8.36

36.97

28.61

20

0.69

0.004

0.04

11.89

and including

68.16

85.86

17.70

12

0.96

0.001

0.12

3.33

FCD-23-033

9.91

45.94

36.03

36

0.26

0.002

0.02

1.57

and

74.03

116.06

42.03

42

0.35

0.001

0.02

2.99

130.83

159.80

28.97

28

0.24

0.001

0.02

0.99

FCD-23-034

75.58

118.87

43.29

28

0.29

<0.001

0.02

1.13

and

140.44

152.10

11.66

11

0.18

0.001

0.02

0.63

FCD-23-030

No significant intercepts

FCD-23-031

No significant intercepts

FCD-23-035

No significant intercepts

鑽孔ID

從…

長度

真寬度

CU

Au

(M)

(M)

(M)

(M)

(%)

(%)

(克/噸)

(克/噸)

FCD-23-032

0.00

101.31

101.31

72

0.45

0.002

0.04

6.69

包括

8.36

36.97

28.61

20個

0.69

0.004

0.04

11.89

並且包括

68.16

85.86

17.70

12

0.96

0.001

0.12

3.33

FCD-23-033

9.91

45.94

36.03

36

0.26

0.002

0.02

1.57

74.03

116.06

42.03

42

0.35

0.001

0.02

2.99

130.83

159.80

28.97

28

0.24

0.001

0.02

0.99

FCD-23-034

75.58

118.87

43.29

28

0.29

0.02

1.13

140.44

152.10

11.66

11.

0.18

0.001

0.02

0.63

FCD-23-030

沒有重大截獲

FCD-23-031

沒有重大截獲

FCD-23-035

沒有重大截獲

Notes: All intercepts are reported as downhole drill widths. Mineralization includes bulk porphyry-style zones and breccia mineralization. Porphyry-style zones true widths are interpreted to be close to drilled widths. Breccia true widths are approximate due to the irregular shape of mineralized domains.

注:所有截留量都報告為井下鑽頭寬度。成礦作用包括塊狀斑岩型礦化和角礫巖礦化。斑岩型帶的真實寬度被解釋為接近鑽探寬度。由於礦化域的不規則形狀,角礫巖的真實寬度接近。

Table 2: Collar Locations from the Drill Holes Reported Herein

表2:此處報告的鑽孔的卡箍位置

Drill Hole ID

Easting

Northing

Elevation

Azimuth

Dip

Target

Depth

Depth

(m)

(°)

(°)

(ft)

(m)

FCD-23-030

548130

3625511

136

335

-46

Rye N

965.8

294.38

FCD-23-031

548027

3625492

1344

193

-48

Rye S

883.7

269.35

FCD-23-032

548295

3624213

1246

70

-50

Pole Breccia

548.8

167.27

FCD-23-033

548294

3624213

1246

60

-78

Pole Breccia SW

822.4

250.67

FCD-23-034

548252

3624335

1280

80

-60

B-24

499.0

152.10

FCD-23-035

548378

3624465

1326

50

-50

E Copper Knight

530.0

161.54

鑽孔ID

向東

北距

高程

方位角

浸漬

目標

水深

水深

(M)

(°)

(°)

(FT)

(M)

FCD-23-030

548130

3625511

136

三百三十五

-46

黑麥N

965.8

294.38

FCD-23-031

548027

3625492

1344

一百九十三

-48

黑麥S

883.7

269.35

FCD-23-032

548295

3624213

1246

70

-50

極角礫巖

548.8

167.27

FCD-23-033

548294

3624213

1246

60

-78

極地角礫巖西南

822.4

250.67

FCD-23-034

548252

3624335

一二八零

80

-60

B-24

499.0

152.10

FCD-23-035

548378

3624465

1326

50

-50

E銅騎士

530.0

161.54

Note: Coordinates are given as World Geodetic System 84, Universal Transverse Mercator Zone 12 north (WGS84, UTM12N).

注:座標為世界大地測量系統84,通用橫向墨卡託12區北(WGS84,UTM12N)。

Next Steps

接下來的步驟

Phase II drilling, which includes a total of twenty-eight drill holes was completed in June 2023. The results for twenty-six drill holes have been released to date. The assay results for the remaining two completed drill holes will be released as they are received, analyzed and confirmed by the Company.

第二階段鑽探於2023年6月完成,其中包括總共28個鑽孔。到目前為止,已經公佈了26個鑽孔的結果。其餘兩個已完成鑽孔的化驗結果將在公司收到、分析和確認後公佈。

To rank and prioritize targets for the 20,000-metre Phase III drill program, the Company is integrating and interpreting multiple datasets, including geological mapping, drill core, airborne magnetic, electromagnetic, spectral and geochemical data. The Phase III drill program is scheduled to commence in the fourth quarter of 2023 with the following three objectives:

為了對20,000米長的第三階段鑽探計劃的目標進行排序和優先排序,該公司正在整合和解釋多個數據集,包括地質制圖、鑽芯、航空磁性、電磁、光譜和地球化學數據。第三階段演習計劃於2023年第四季度開始,目標如下:

  • Reconnaissance drilling on new targets;
  • Expanding the MRE; and
  • Better delineating high-grade mineralized zones.
  • 對新目標進行偵察演練;
  • 擴大最低工資標準;以及
  • 更好地圈定高品位礦化帶。

An assaying program of historical drill core samples has been initiated to determine the potential for inclusion of gold in future resource updates. Historically, approximately 12 percent of all core samples analyzed for copper were also analyzed for gold. As part of the program, the first breccia to be analyzed is Childs Aldwinkle, for which we have submitted 453 samples to the laboratory. Results will be released as they are received, analyzed and confirmed by the Company. Upon completion of the Childs Aldwinkle assaying, the Copper Prince, Pole, and Copper Giant breccias as well as the Keel underground zone will be prioritized for gold analysis.

已經啟動了一項對歷史鑽探岩心樣品的分析計劃,以確定未來資源更新中是否有可能包含黃金。從歷史上看,在所有分析銅的岩心樣品中,大約有12%的樣品也分析了金。作為該計劃的一部分,第一個要分析的角礫巖是Childs Aldwinkle,我們已經為其向實驗室提交了453個樣本。結果將在公司收到、分析和確認後公佈。在完成Childs Aldwinkle化驗後,銅王子、波爾和銅巨角礫巖以及基爾地下地帶將優先進行黃金分析。

The Phase II metallurgical program will commence in the third quarter of 2023 and will focus on grind size optimization to test viability of coarser particle flotation, gold deportment to concentrate and further test work on near surface oxide material.

第二階段冶金計劃將於2023年第三季度開始,重點是磨礦粒度優化,以測試較粗顆粒浮選的可行性,金精礦的走向,以及近地表氧化物材料的進一步測試工作。

Sampling Methodology, Chain of Custody, Quality Control and Quality Assurance

抽樣方法、監管鏈、質量控制和品質保證

All sampling was conducted under the supervision of the Company's geologists and the chain of custody from Copper Creek to the independent sample preparation facility, ALS Laboratories in Tucson, AZ, was continuously monitored. The samples were taken as 1⁄2 core, over 2 m core length. Samples were crushed, pulverized and sample pulps were analyzed using industry standard analytical methods including a 4-Acid ICP-MS multielement package and an ICP-AES method for high-grade copper samples. Gold was analyzed on a 30 g aliquot by fire assay with an ICP-AES finish. A certified reference sample was inserted every 20th sample. Coarse blanks were inserted every 20th sample. Approximately 5% of the core samples were cut into 1⁄4 core and submitted as field duplicates. On top of internal QA-QC protocol, additional blanks, reference materials and duplicates were inserted by the analytical laboratory according to their procedure. Data verification of the analytical results included a statistical analysis of the standards and blanks that must pass certain parameters for acceptance to ensure accurate and verifiable results.

所有采樣都是在公司地質學家的監督下進行的,從銅溪到位於亞利桑那州圖森市的獨立樣品製備設施ALS實驗室的保管鏈受到持續監測。樣品為1個⁄2芯,芯長超過2m。樣品被粉碎、粉碎,樣品紙漿使用行業標準分析方法進行分析,包括4-酸性電感耦合等離子體質譜多元素分析方法和高品位銅樣品的電感耦合等離子體原子發射光譜方法。金在30克等份上用火焰分析和電感耦合等離子體發射光譜分析。每隔20分鐘插入一份標準樣品這是樣本。每隔20分鐘插入一次粗坯這是樣本。大約5%的岩心樣本被切割成1個⁄4岩心,並作為現場複製品提交。在內部QA-QC方案的基礎上,分析實驗室按照其程序添加額外的空白、標準物質和複製品。分析結果的數據核查包括對標準和空白的統計分析,這些標準和空白必須通過某些參數才能接受,以確保準確和可核查的結果。

Qualified Person

有資格的人

The scientific and technical information contained in this news release has been reviewed and approved by Faraday's VP Exploration, Dr. Thomas Bissig, P. Geo., who is a Qualified Person under National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101").

本新聞稿中包含的科學和技術資訊已由Faraday勘探副總裁Thomas Bissig博士審閱和批准,他是符合國家儀器43-101-礦物專案披露標準(“NI 43-101”)的資格人員。

About Faraday Copper

關於法拉第銅業

Faraday Copper is a Canadian exploration company focused on advancing its flagship copper project in Arizona, U.S. The Copper Creek project, is one of the largest undeveloped copper projects in North America with open pit and bulk underground mining potential. The Company is well-funded to deliver on its key milestones and benefits from a management team and board of directors with senior mining company experience and expertise. Faraday trades on the TSX under the symbol "FDY".

法拉第銅業是一家加拿大勘探公司,專注於推進其在美國亞利桑那州的旗艦銅礦專案。銅溪專案是北美最大的未開發銅礦專案之一,具有露天礦和散裝地下開採潛力。公司資金充裕,能夠實現其關鍵里程碑,並從擁有資深礦業公司經驗和專業知識的管理團隊和董事會中獲益。Faraday在多倫多證交所交易,代碼為“FDY”。

For additional information please contact:

如需更多資訊,請聯繫:

Stacey Pavlova, CFA
Vice President, Investor Relations & Communications
Faraday Copper Corp.
E-mail: info@faradaycopper.com
Website:

Stacey Pavlova,CFA
總裁副經理,投資者關係和公關部
法拉第銅業公司
電子郵件:info@faradayCopper.com
網站:

To receive news releases by e-mail, please register using the Faraday website at .

要通過電子郵件接收新聞稿,請使用Faraday網站註冊,網址為

Cautionary Note on Forward Looking Statements

關於前瞻性陳述的警示說明

Some of the statements in this news release, other than statements of historical fact, are "forward-looking statements" and are based on the opinions and estimates of management as of the date such statements are made and are necessarily based on estimates and assumptions that are inherently subject to known and unknown risks, uncertainties and other factors that may cause actual results, level of activity, performance or achievements of Faraday to be materially different from those expressed or implied by such forward-looking statements. Such forward-looking statements and forward-looking information specifically include, but are not limited to, statements concerning the exploration potential of the Copper Creek property.

除有關歷史事實的陳述外,本新聞稿中的一些陳述均為“前瞻性陳述”,是基於管理層截至作出此類陳述之日的意見和估計,必然基於估計和假設,這些估計和假設本身就會受到已知和未知風險、不確定性和其他因素的影響,這些因素可能會導致Faraday的實際結果、活動水準、業績或成就與此類前瞻性陳述中明示或暗示的內容大不相同。此類前瞻性表述和前瞻性資訊具體包括但不限於有關銅溪礦區勘探潛力的表述。

Although Faraday believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements should not be in any way construed as guarantees of future performance and actual results or developments may differ materially. Accordingly, readers should not place undue reliance on forward-looking statements or information.

儘管法拉第認為這些前瞻性陳述中表達的預期是基於合理的假設,但這些陳述不應以任何方式被解釋為對未來業績的保證,實際結果或發展可能與此大不相同。因此,讀者不應過分依賴前瞻性陳述或資訊。

Factors that could cause actual results to differ materially from those in forward-looking statements include without limitation: market prices for metals; the conclusions of detailed feasibility and technical analyses; lower than expected grades and quantities of resources; receipt of regulatory approval; receipt of shareholder approval; mining rates and recovery rates; significant capital requirements; price volatility in the spot and forward markets for commodities; fluctuations in rates of exchange; taxation; controls, regulations and political or economic developments in the countries in which Faraday does or may carry on business; the speculative nature of mineral exploration and development, competition; loss of key employees; rising costs of labour, supplies, fuel and equipment; actual results of current exploration or reclamation activities; accidents; labour disputes; defective title to mineral claims or property or contests over claims to mineral properties; unexpected delays and costs inherent to consulting and accommodating rights of Indigenous peoples and other groups; risks, uncertainties and unanticipated delays associated with obtaining and maintaining necessary licenses, permits and authorizations and complying with permitting requirements, including those associated with the Copper Creek property; and uncertainties with respect to any future acquisitions by Faraday. In addition, there are risks and hazards associated with the business of mineral exploration, development and mining, including environmental events and hazards, industrial accidents, unusual or unexpected formations, pressures, cave-ins, flooding and the risk of inadequate insurance or inability to obtain insurance to cover these risks as well as "Risk Factors" included in Faraday's disclosure documents filed on and available at .

可能導致實際結果與前瞻性陳述中的結果大不相同的因素包括但不限於:金屬的市場價格;詳細的可行性和技術分析的結論;低於預期的資源等級和數量;獲得監管批准;獲得股東批准;開採率和回收率;重大資本要求;大宗商品現貨和遠期市場的價格波動;匯率波動;稅收;Faraday開展或可能開展業務的國家的控制、法規和政治或經濟發展;礦產勘探和開發的投機性;競爭;關鍵員工的流失;勞動力、供應、燃料和設備成本上升;這些不確定性因素包括:當前勘探或復墾活動的實際結果;事故;勞資糾紛;礦業權或財產權存在瑕疵,或礦產權爭奪戰;協商和接納土著人民和其他群體的權利所固有的意外延誤和成本;與獲得和維持必要的許可證、許可和授權以及遵守許可要求相關的風險、不確定性和意外延誤,包括與銅溪礦藏相關的風險;以及Faraday未來的任何收購活動中存在的不確定性。此外,還有與礦產勘探、開發和採礦業務有關的風險和危險,包括環境事件和災害、工業事故、不尋常或意外的地層、壓力、塌方、洪水和保險不足或無法獲得保險以涵蓋這些風險的風險,以及Faraday提交的披露檔案中包含的“風險因素”。

This news release does not constitute an offer to sell or a solicitation of an offer to buy any securities in any jurisdiction to any person to whom it is unlawful to make such an offer or solicitation in such jurisdiction. This news release is not, and under no circumstances is to be construed as, a prospectus, an offering memorandum, an advertisement or a public offering of securities in Faraday in Canada, the United States or any other jurisdiction. No securities commission or similar authority in Canada or in the United States has reviewed or in any way passed upon this news release, and any representation to the contrary is an offence.

本新聞稿不構成在任何司法管轄區向任何人出售或邀請購買任何證券的要約,而在該司法管轄區向任何人提出此類要約或要約是非法的。本新聞稿不是,在任何情況下都不得解釋為在加拿大、美國或任何其他司法管轄區的招股說明書、發售備忘錄、廣告或公開發行證券。加拿大或美國的證券委員會或類似機構在發佈本新聞稿時沒有審查或以任何方式傳遞,任何相反的陳述都是違法的。

SOURCE: Faraday Copper Corp.

資料來源:法拉第銅業公司


View source version on accesswire.com:
在accesswire.com上查看源代碼版本:

声明:本內容僅用作提供資訊及教育之目的,不構成對任何特定投資或投資策略的推薦或認可。 更多信息
    搶先評論